My digital camera is being persnickety but the two video cards are MSMT259 Rev 0 which is the Cirrus Logic daughtercard and the main card is MSMT260 Rev C which I have gathered is the Realizm Z25. This thing has two cooling fans at the rear that blow through the plastic housing across the surface of both boards and out the rear of the machine. There is also a round port similar to an S-Video with the two VGA outs. I'd have to do too much disassembly to get a clear picture of the motherboard. The machine works now, so I don't want to tear it down on the chance that it may not work when I put it back together.
Here's a picture of a complete system I found that has a 410 standing on end like a tower. It really should sit flat, though. It is strong enough inside to support a huge monitor easily.
http://www3.nit.ac.jp/~shindo/tdz.jpg
I found this pic of the video card disassembled. The large board is the Realizm Z25, the small one is the Cirrus Logic.
http://bbs.yjfy.com/UploadFile/2004-9/200494221856529.jpg
What kind of memory goes in those slots?
Here's a picture of a complete system I found that has a 410 standing on end like a tower. It really should sit flat, though. It is strong enough inside to support a huge monitor easily.
http://www3.nit.ac.jp/~shindo/tdz.jpg
I found this pic of the video card disassembled. The large board is the Realizm Z25, the small one is the Cirrus Logic.
http://bbs.yjfy.com/UploadFile/2004-9/200494221856529.jpg
What kind of memory goes in those slots?