Thread
Cannot install OS 8.0 on a beige G3
Hi,
I have a CD with 8.0 on it, but when I try booting it on my beige G3, I receive a message that it cannot start from this disk because the computer is kinka unknown to that OS version.
OS 8.0 should be installable on the beige G3, so why the copy I have cannot boot it?
Thanks
I have a CD with 8.0 on it, but when I try booting it on my beige G3, I receive a message that it cannot start from this disk because the computer is kinka unknown to that OS version.
OS 8.0 should be installable on the beige G3, so why the copy I have cannot boot it?
Thanks
if it's 8.0, it should be the disc that shipped with the G3. when starting on the OS it came with, you SHOULD use the discs that came with the machine. otherwise it won't work
if you don't have the discs, you need to buy some. Go for eBay to get the discs.
if you don't have the discs, you need to buy some. Go for eBay to get the discs.
What I have is a generic OS 8.0 disk. It does not specify any computer specific information.if it's 8.0, it should be the disc that shipped with the G3. when starting on the OS it came with, you SHOULD use the discs that came with the machine. otherwise it won't work
if you don't have the discs, you need to buy some. Go for eBay to get the discs.
And, just for information, why the machine specific CD is required?
Thanks
Beige G3s need OS 8.1 with an enabler to boot.
I second Unknown_K.
Peace,
Drew
Peace,
Drew
You may be right, but according to my research it came originally with OS 8.0.Beige G3s need OS 8.1 with an enabler to boot.
In the mean time, I did something weird: I copied the OS 8.0 system folder to a partition, then upgraded it with the patch offered free on Apple's site, and it can boot a non-complete version of 8.1. It proves that 8.1 can boot on it, but nothing else.
I have two Power Mac G3 disks. One is 8.0 and the other is 8.1 for the AIO. If you need a copy PM me.
Yep, I can confirm that. There is a special Mac OS 8 disk for the Beige G3. The standard one won't work.
However, a standard 8.5/8.6 or later CD will work fine.
However, a standard 8.5/8.6 or later CD will work fine.
What's with all the zombiethreads?
-
Drew
-
Drew
peopel got nothing to talk about so they dig up corpses here and there
did you lost this bit ?
it dropped off
did you lost this bit ?
it dropped off
They rise from the dead to become repositories for frequently asked questions and their answers (all of them from all points of view). ;-)
I remember getting it to start from an OS 8.0 standard installation, I just needed to install it on the hard disk from a 5260, then swap the 5260 HD in to the Beige G3.
Which kinda defeats the purpose.
Humm.
Well, at least you know that now, for the record.
Which kinda defeats the purpose.
Humm.
Well, at least you know that now, for the record.
Lol, people with ATA HDs in their Beigies...
*smirks at his G3 without the door on and peers at it's 9GB SCSI HD connected to the SCSI card
*
*smirks at his G3 without the door on and peers at it's 9GB SCSI HD connected to the SCSI card
*Oi, I will not put up with anyone laughing at me!Lol, people with ATA HDs in their Beigies... *smirks at his G3 without the door on and peers at it's 9GB SCSI HD connected to the SCSI card*
So just how many OS X apps can you fit on that puny little drive of yours then? What's that? You installed just the OS and iLife '05 and found it was already full up? Hmmm... *winks at his G3 under the desk with its 160 GB ATA drive
i have a 120GB HDD in my AIO, and i can tell you its awesome