Home▸ Forums▸ Instant Wireless Network Access Point - Version 2.2: HELP!!!!▸ Instant Wireless Network Access Point - Version 2.2: HELP!!!…
Thread

Instant Wireless Network Access Point - Version 2.2: HELP!!!!

Instant Wireless Network Access Point - Version 2.2: HELP!!!! Networking 4 posts Aug 17, 2002 — Aug 18, 2002
View original thread
#1 Sat, 17 Aug 2002 - 23:31
Here's my story. I have an iMac DV 400 with a dead ethernet port. I bought an airport card and a Linksys Wireless Network Access Point - Version 2.2 (latest firmware) I have the latest Airport software but OS X and OS 9 refuse to see the WAP. The WAP is connected to a d-link router that assigns ip's automatically and I set the WAP accordingly. I also tried plugging the WAP directly into my cable modem. The airport card on the mac is set to dhcp as it should be. So far, the signal strength indicator on the mac has yet to show anything. The WAP is about 6" away so it should be in range Is there some mysterious setting I'm missing? HELP?

TIA

Thade


http://www.linksys.com/products/pro...rid=22&prid=429
#2 Sun, 18 Aug 2002 - 06:16
is WEP or MAC address filtering on?

turned them both off if they are.
#3 Sun, 18 Aug 2002 - 08:45
Problem solved! Airport antenna wasn't connected to card


Thade
#4 Sun, 18 Aug 2002 - 20:50
Quote:
Originally posted by Thade:
Problem solved! Airport antenna wasn't connected to card


Thade


that's an old one�

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.