Skip to main content
Home▸ Forums▸ How to get NEC laptop onto Airport network? — #6▸ How to get NEC laptop onto Airport network? — #6
Post #6 by DBursey
Post
Thanks for posting in reply to my questions. As for the details:

Quote:
What type of building is it: Are the walls concrete blocks, or wood and plaster/sheetrock.

How far away is her computer from the BS (going in a straight line approx.)

Does her Sytem have Any avalible USB ports? Does it have any Open PCI slots Or is it a laptop with USB or any avalible PCMCIA slots open?

Once you answer these I'll be able to give you a strong recomendation about what she should get.


It's a three-story residence, mostly wood / sheetrock. The basestation is situated in a room on the 3rd floor, while her computer is in a room in the 1st floor (ground level). The straight-line distance between BS - Wintel is approx. 35 feet. (as an aside, I get a very strong signal from the 3rd to the 2nd floor where my iMac resides, approx. 20 -25 feet straight thru the floor).

My tenant's computer is a desktop pentium II running Win98. I don't believe it has USB (I'll check) but it does have at least one available PCI slot, perhaps more.

One thing: The room where her computer sits does have metal wall framing, but the signal would have to travel vertically thru the floor/ceiling, which is all wood / sheetrock, so hopefully the metal framing in the room walls won't be too much of a factor.

Thanks again for your help!
mp.ls