Some thoughts: 1. Mine works fine with this software. 2. There was also a ROM update file included that you could try. 3. Alternatively, your pcmcia slot, card or card dongle mi…

HAHAHAHAH ThanksPsssst The link to my wiki is not that necessary but if you really want to put it it's : http://68kmla.org/wiki/User:Mars478 Click to expand... Ok, I've fix…

I installed it, but it still doesn't work. The extensions load, I have the control panel, I configurated it etc. etc. Do I need a special modem?

Should work just fine. Just make sure you use Toast 4 or earlier, as it's the last one that works with a 68k processor. But, to answer your implied subject-line question: No, you…

My LC520 has external scsi and running OS 7.6.1. ( At one time i had an external hard drive via scsi but that external drive and it's replacement had a horrible death. RIP dear dr…

My LC520 has external scsi and running OS 7.6.1. ( At one time i had an external hard drive via scsi but that external drive and it's replacement had a horrible death. RIP dear d…

Update: After storing it with both batteries removed for a couple days, I have gotten a little further: So before, when I had all power unplugged for a few minutes, it would start…

Near Santa Cruz, CA. So it's a bit of a drive. Thanks though I appreciate it!

Brought it home, and it wouldn't start up. Cracked the case, and reseated connectors and did some general cleaning. Not I've got the familiar "Where is my System Disk?" icon. Now…

Brought it home, and it wouldn't start up. Cracked the case, and reseated connectors and did some general cleaning. Not I've got the familiar "Where is my System Disk?" icon. No…

Sorry, I missed the Kanga part somehow and had it in my head that it was a 3400c. Still, for $12 you can't go far wrong. Click to expand... For almost all intents and purposes …

Sorry, I missed the Kanga part somehow and had it in my head that it was a 3400c. Still, for $12 you can't go far wrong.

It's been left plugged in for several days and exhibits the same behavior (and consistently loses date/time settings, which is pretty much a guaranteed sign of PRAM battery failure…

Erratic and observable power-related behaviour is characteristic of backup battery failure in nearly every single iteration of the PowerBooks, though the early ones (1xx series) se…

One more problem...the battery holds a good charge, but the machine won't boot from it after sitting unplugged for a half hour. However it will boot from the battery if I unplug th…

I've got a Kanga G3 Powerbook which I picked up recently for essentially nothing. It's running 9.1 and its RAM is maxed out. The battery even holds a 2+ hour charge. I've got it co…

{ "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The requested content cannot be loaded. Please try again l…

Do you reset the power manager after plugging the Portable in (press the interrupt and reset buttons together)? After it's had all power removed, my backlit Portable always requir…

I'd say it might refer to requiring an Apple certification - the reason Apple uses Torx screws in the first place is to try and stop people like you and I from opening them up. …

I'd say it might refer to requiring an Apple certification - the reason Apple uses Torx screws in the first place is to try and stop people like you and I from opening them up. …

if the main battery is so shot its shorted out you could be driving the supply into protection mode, same thing happens with my 386 laptop, with the battery in it will try to fire,…

I have started the upgrade, almost finished but ran into a snag. The one thing I have not tried is installing a PDS terminator in the G3 card. The directions say nothing about t…

back int he day i used a soldering iron on plastic stuff to get the screws out. No, it didnt look pretty, but hey the screws were out....

I have started the upgrade, almost finished but ran into a snag. I can not get it to recognize the G3 card and when installed it will only startup with extensions off. The card i…

tossing in NEC also, old monitors were great, the newer ones are re branded Mitsubishi's