http://www.kernelthread.com/mac/osx/arch_boot.html It's in the reg section. My iBook has two 512MB modules and so has 00000000 20000000 20000000 20000000 Yours would appear to …

Anybody.

I did the following command: dev /memory@0 .properties and it came up with the following: Code: name memory device_type memory reg 00000000 00000000 …

Installed new pram battery as I say on another thread, and these replacement cells seem to work fine, though to be honest, not having a multimeter, I haven't tested the charge prop…

It is possibly, I can't remember off-hand, but it probably involves finding the path to the RAM and getting .properties. Try doing > dev / ls to see a list of devices, and…

I will be bidding on this http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330283948578&ssPageName=STRK:MEWA:IT&ih=014 in the hopes that it…

I'm not sure, but wouldn't it be easier to boot the machine up and go to About This Mac?

With New World Macs I get, I'd like to be able to find the RAM amount quickly and easily, so is there an Open Firmware command to get the total amount of RAM?

When I powered down for the final time, the battery still had well over 30% charge and it was no more than an hour later when I attempted and failed to boot it up again. I reset t…

There are quite a few possibilities. Just for one, the battery was barely-charged, and the presence of the CD-ROM drive (which is constantly polled by the system 'in case' there i…

I picked up a 3400 on eBay a week or two ago. It was sold w/o an ac adapter but w/ a charged battery. When it arrived, I played with it a bit, booting it up on two occasions. Aft…

Yes, I also emailed the company and they said they don't know about Macs, but it needs a capture card of some kind. So now I'm going to have to look for a capture device.

That S-Video port on the back of the Lombard only does output, not input. You'll need either a PCMCIA or USB video capture solution of some sort.

Just got (for husband's peace of mind) a set of 2 security cameras that wirelessly connect to a receiver, which connects to TV/VCR/etc with an AV cable that has one red and one yel…

I'm about to put down $21 for this item: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230304040895 Click to expand... So buy it already! [] ]'>

Hello everyone, I have a PowerBook G3 Wallstreet with 9.2 installed. 233MHz model with 256MB of RAM. The machine runs fine with OS 9, but I decided I'd install Mac OS X. I read th…

Expansion chassis are very uncommon. At least one company, possibly Magma, advertised one for the SE and Portable, so anything post SE/II was expandable via an external box. Assumi…

Not really, but you'll have to go a ways below $99 to sell it on ebay vs him selling it on his site. They can be hard to find since most of the 3400cs on ebay these days seem to b…

Does Contiki act much differently on the 16-bit GS than the older 8-bit Apples? Click to expand... No, it's just like running any other 8-bit software. The increased speed is a…

Does Contiki act much differently on the 16-bit GS than the older 8-bit Apples?

http://www.a2retrosystems.com/downloads.htm v 1.3 has the web browser and a few other apps (mostly just proof-of-concept). v 2.1 is the one you need if you're planning to set up …

If anyone (luddite?) can point at some good resources for installing Contiki on an Apple II, that would be much appreciated. I've googled and poked around the home page but haven'…

having that Rage Pro 128 isnt helping things either. i would at least recomend a geforce 2 card and above, but you will still be pushing it. but since that has AGP 2x a 6200 Wang A…

The problem here is you are using a new OS with high overheads on a very old CPU and clapped out graphics card. Tiger should give you a much smoother ride.

The Magma expansion chassis was compatible with any Mac with a PCMCIA or PCI slot. In the old days, I believe they made Nubus expansion chassis too.