Search titles, bodies, and author names
Found 13,914 posts across 1 forum.

1400 keyboard connector pinout? — #4

Have you looked at the switch that tells the Mac when the lid is closed? That's often a reed switch and magnet. Reed switches have a tendency over time to get "sticky", and your 14…
68kMLA Hardware by Anonymous Freak Thu, 7 Jan 2010 - 07:11

1400 keyboard connector pinout? — #3

Have you looked at the switch that tells the Mac when the lid is closed? That's often a reed switch and magnet. Reed switches have a tendency over time to get "sticky", and your 14…
68kMLA Hardware by H3NRY Thu, 7 Jan 2010 - 05:39

Mylar Capacitors — #3

A 470 uF mylar would be huge! Going up a step in voltage won't hurt, and may offer a bit better reliability, but the temperature rating is a better measure of how long they last. I…
68kMLA Hardware by H3NRY Thu, 7 Jan 2010 - 05:06

Possible conquest: iBook G4 1.07GHz — #2

NICEEEEEEEE!!!!!!!!!! You can do the glowing Apple Mod, where you change the color of the Apple. Those are great laptops, I have one in my collection, it's my mom's.
68kMLA Hardware by Mars478 Wed, 6 Jan 2010 - 22:57

Boxed Quadra 605 and 14" Apple CRT! — #10

Well, it was literally just the computer in the box. I was kinda disappointed. Oh well. The new RAM I bought also works in the Quadra. I'll keep a lookout on eBay for an acc…
68kMLA Hardware by olePigeon Wed, 6 Jan 2010 - 21:23

Possible conquest: iBook G4 1.07GHz — #1

So today I get call from my youth pastor saying "Somebody has donated a black macbook(lucky!). My iBook just sort of growels at me so I may give it to you to tinker with(it needs a…
68kMLA Hardware by Christopher Wed, 6 Jan 2010 - 19:01

Pismo mystery — #2

Dead logic board battery? PRAM needing reset? Hard drive(s) could be of an ATA standard that isn't supported? Maybe the controller for all the drives went dead? All the above? …
68kMLA Hardware by phreakout Wed, 6 Jan 2010 - 18:33

1400 keyboard connector pinout? — #2

Does anyone have the pinout for the internal keyboard connector on the PB1400? The one that I had declared "dead" works just fine hooked up to external monitor and kb/mouse with th…
68kMLA Hardware by Trash80toHP_Mini Wed, 6 Jan 2010 - 02:03

1400 keyboard connector pinout? — #1

Does anyone have the pinout for the internal keyboard connector on the PB1400? The one that I had declared "dead" works just fine hooked up to external monitor and kb/mouse with t…
68kMLA Hardware by Anonymous Freak Wed, 6 Jan 2010 - 01:23

Pismo mystery — #1

I recently purchased two parts Pismos 400s that I have combined into one. I am not sure what I am going to do with it now that it is done (eBay, maybe), but I have a question about…
68kMLA Hardware by beachycove Tue, 5 Jan 2010 - 23:35

3400 board question... — #8

Good advice always, Bunsen, thanks. I'll post a progress report when the patient is off the table...
68kMLA Hardware by J English Smith Tue, 5 Jan 2010 - 22:51

3400 board question... — #7

That's certainly a cheap fix. Be patient with the teardown, and keep track of your screws. BTW, in case it wasn't clear from LC_Guy's reply above, the "Kanga" G3 Powerbook logic …
68kMLA Hardware by Bunsen Tue, 5 Jan 2010 - 22:48

Sawtooth in a B&W case — #3

If you want to make a trip down to Deptford I have a B&W board with a 400mhz chip you can have for free. I have a power supply too if you want it.
68kMLA Hardware by bizzle Tue, 5 Jan 2010 - 20:44

3400 board question... — #6

Thanks for everyone's comments. I think I'm ready to pull the switch on this! I will check and see if they have the 240mhz board; but for $20 + ship, the 200 may be the most cost-e…
68kMLA Hardware by J English Smith Tue, 5 Jan 2010 - 20:09

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.