My just-new one with 512k RAM and a 400ghz processor runs Tiger quite nicely. Only trouble I've had is with Word 98 running in classic mode - had to get something to word process i…

My just-new one with 512k RAM and a 400ghz processor runs Tiger quite nicely. Only trouble I've had is with Word 98 running in classic mode - had to get something to word process i…

Fremont Fry's also has 1/2 AA 3.6v batteries. San Jose Fry's does not carry them.

Beachycove, I have a Pismo (see signature) running OS X 10.4.11 perfectly fine. It performs quite well with Tiger, although I'm planning on dropping it down to Panther (10.3.x) d…

Can't wait for the images

How well does a Pismo function under X? I have two Pismo parts machines and am pondering spending some money ($100 or so) on a battery and memory to make a single low-end (probably…

Not sure if this is applicable in your situation, but I'm running Netatalk under Slackware 13 (upgraded from Slackware 12.1). After my upgrade, I noticed that I couldn't connect t…

I would concentrate on getting AFP going. At least that is what netatalk is good at doing.

Porter, Thanks a lot. That was interesting. I removed (well, commented) the config line in the atalkd.conf and restarted services, then power cycled the AsanteTalk. when I check…

I would clear the address and zone information from your netatalk.conf. Zones only make sense to netatalk if it is active on multiple network cards and acting as a bridge between …

If I unplug the AsanteTalk for a minute, the Mac tells me that the AppleTalk network is not available. If I then plug it in I do get the alert from the Mac that the AppleTalk netwo…

Once the machines are all up and running and you think everything should be working, unplug the power to the AsanteTalk, wait a minute, then and re apply the power to it. This sho…

As everyone has said, it's always the battery. You'll get the startup chord, but nothing else until the battery has been replaced.

Thank you. Click to expand... De nada, comrade! ) Maybe you can give me some feedback on my notions for a new home for my plastic fish! :?: Methinks it's time to start…

http://www.google.com/#hl=en&q=DIY-Vacuum-Forming-Machine.html&aq=f&aqi=&oq=DIY-Vacuum-Forming-Machine.html&fp=6b22d27f49a5e7dd [] ]'&g…

[] ]'> Yep, it'd be even easier than doing the CRT/bezel interface. Just make a plaster cast of the insides of the Compact and then smooth everything perfectly, no need for …

They're "copy protected" in the sense that you can't make additional copies outside of a personal backup. Since the software isn't sold anymore, it's perfectly legal to extend cop…

On the battery thing, johnklos is right. If you get a chime, then the system is ready to load. However, as JRL said, switch it off and back on right away and see if it boots. Whe…

.conf file stuff: from atalkd.conf: fxp0 -seed -phase 2 -net 1-1000 -addr 1000.142 -zone "weif" This seems to match what I see in /var/log/messages afpd.conf is empty (except t…

the AsanteTalk packaging says it allows your ethernet Mac "to communicate with up to eight LocalTalk devices, including LocalTalk Macintoshes and LocalTalk supported printers." I w…

Thanks for all the tips, everyone. Yes, the kernel was compiled with netatalk enabled. I don't see any errors (at least nothing I think are errors) in /var/log/messages when I st…

I keep looking at my iMac G3 and getting ideas, but I don't have injection moulding gear handy so to speak... Click to expand... Perhaps the Vacuum molding procedure mentioned …

and since it's just two leads, it'd be hard to screw up. Click to expand... not that hard, that capacitor is polarized, so it needs to go the right way in, its also smt which c…

Could you post some piccies of the SE in the Plus body?

Aiiiii! Not sure that's a good idea at all. Pulling air from the top could interfere with exhausting air from the inside as well as draw in higher warmer air in the room, and theor…