I see absolutely no signs of a 6 GB hard drive limit. I'm using a 40 GB hard drive (Apple ROMed) in mine. Click to expand... There is a 4GB limit for SCSI Disk Mode...if you ha…

Try here: http://www.ppcmla.com/downloads/VPower_Vimage_PB.img.sea I stuffed up my installer disk image. I haven't tested the .sea file, but if everything worked as it should (D…

Sorry, should have stated the G3 upgrade. Good to know though that it will work regardless while I hunt down online drivers. This shall be my next project.

The driver is required to activate the L2 cache. Otherwise, the CPU module will work fine. A G3 without cache is virtually the same thing as a 603e. I have that same processor u…

Driver for the hard drive or the G3 upgrade? I see absolutely no signs of a 6 GB hard drive limit. I'm using a 40 GB hard drive (Apple ROMed) in mine. As for the G3 upgrade, I've…

I am looking to install a 10GB HD in my 1400 with a 233 Vimage G3 upgrade installed. I have the driver on floppy but alas no floppy drive for the 1400. If I install the new drive…

Ok, I took time today to look at that. I installed Airport Software 2.0.4 (I had 1.2 installed, that came with OS 9.2.2). Now it kinda works better: I can connect to my network us…

well I know the master slave jumpers are ok. the computer worker great for several weeks after the new hd. I reformateded and installed 10.4 clean and then ran tech tools to chec…

For shits and giggles, take the hard drive out and just boot from an os x disk, see what happens. Thats how I've figured out bad hard drives and such. Of course, a full size G4 to…

Hadn't time to start up the Pismo last week. But I bet it'll will work with the latest Airport software, as said by freundling. I'll let you know!

I have: G3 desktop OS 9.2.2 (I'm struggling to get it to dual boot Ubuntu) 1000 MHz G3 (running from a 83 MHz FSB) 768 MB ram 80 GB hd 24x cd-rom ATI Radeon 9200 PCI 2-port…

I'd take it back to when you replaced the hard disk - did you set master/slave on the new drive? The fact that it's chiming, booting to a grey screen suggests all is good - so I'…

Oops, missed those last couple of sentences. The reason for asking was that I had a problem with a 2300c caused by overheating of a transformer on the logic board (one of those sq…

The best way to reset the pram is to disconnect main power, disconnect the PS from the motherboard, remove the pram battery, tap the power button to kill any residual voltage, and …

what is it with beige motherboards dying? / the symptoms were a non-booting OS X install, OS 9 booting fine. Click to expand... you THINK you cleared it with Command-Option-P-R a…

Does the Duo work on its own fine outside the Dock?

So, did you get it fixed? If so, what fixed it? Peace, Drew

I had a bad hd and replaced it 2 weeks ago bad sectors. now it has stopped starting up 1 it chimes 2 i get a gray screen no pin wheel 3 nothing happens. i have tried bootin…

I have been tinkering with mine lately, and it will end up like this: G3 Tower with G3/400mhz processor from my Blue/White G3 384MB RAM 9.1GB SCSI hard disk 3GB IDEhard disk Z…

what is it with beige motherboards dying? / the symptoms were a non-booting OS X install, OS 9 booting fine. Click to expand... you THINK you cleared it with Command-Option-P-R a…

It WILL work. Make sure you install the latest Airport 2.0.4 http://docs.info.apple.com/article.html?artnum=120120

My Lucent WaveLAN card had the same problem. Turned off encryption, and used the MAC restriction feature instead.

OS 9 can't do "WEP passwords" very well. Is your base station a genuine AirPort base station, or is it 3rd party? If it's 3rd party, the password can't be used in OS 9. You'll h…

Thanks for the reply! The base station is a genuine last gen Airport Extreme. Does that change something? Actually I could as well go with the MAC address filter.

OS 9 can't do "WEP passwords" very well. Is your base station a genuine AirPort base station, or is it 3rd party? If it's 3rd party, the password can't be used in OS 9. You'll h…