Probably way too late... And the link above doesn't work. But if it's a Laptop Model 125, you hold down the four arrow keys simultaneously. However, the keyboard has its own bat…

For the record, the first Mac to use ATAPI optical drives was the LPX-40/Tanzania motherboard design used in the 4400 and Mac clones.

You can certainly use DVD-RAM with old 68k Macs... I was doing it for years as a backup medium for my SE/30. You need "DVD-RAM Tune-Up" which is abandonware (and very hard to find…

I posted it on Macintosh Garden some time ago. It should still be there.

I cannot find this driver anywhere and my vimage card is worthless without it (slower than the originally installed 166mhz 603), so would someone here send me the driver, please?

the 575 PCB was missing the gnd on the audio } all fix :beige:

IF i put h/phones i have sound

ok so my 575 pcb come and i have fited it but no sound put the old cc pcb in i have sound 8-o .. i can see the sound go up and down and the top menu flash when the vol is a…

Not sure if this is related, but when modding the Colour Classic to fit a PPC board in it, you have sever one of the wires on the floppy cable to prevent the new PPC board from rea…

do the LCs have the R/C filter network like the older SEs did?

Adding an ICS9178 is also how one converts the Turbo601/66 into a Turbo601/100 (well more like 90 to 96). Click to expand... So, You're the one behind the Turbo601/66 chipping…

You know, yes original 601 ppc's look awesome.. but yeah.. was remounting the heatsink on my new 9150 board today and cracked the chip- why? because it doesn't actally touch the bo…

i had an imac slot load 500mhz fail from heat. I never could fix it so i trashed it. it would power up just fine, but then after a little bit, you could see the picture pulling in…

I've blown one PAV assembly in a G3/600 from excessive heat. The machine still worked, but it took a while to build up the required charge for a successful illumination of the tube…

The Rev A-D (233mhz-333mhz) had the internal fans. The ones with 350mhz or higher don't have fans. Having a 333mhz and 500mhz indigo the only problem I found was burning discs. I …

it wasnt much of a problem back then, but nowadays the hot-cold-hot-cold of convection cooling, or poorly fan cooled components have a tendency, and a strong one at that to break t…

your going to have to take a magnifying glass and light to the logic board. the smoke may had very well come from a circuit trace opening up like a fuse. seen it a few times. if it…

RAM went to hell? In my Classic, when one of the RAM modules went to hell I saw the same behavior. Each boot was a crap shoot.

Well, I plugged it in today for giggles, and whaddya know, I got a chime and the mouse screen. I get varying results though, like sometimes i get chimes of death, and once or twice…

I need to load Gauge Pro on my new Wallstreet to see if ASP was on crack when I checked the thing out. : It's gonna be Beater2 when I'm done loading utilities and drivers on th…

I recently obtained a Wallstreet II PDQ 300MHz running OS 9.2.2 with 192MB RAM & an 8GB hard drive with 4.6GB free. I have a G3 Pismo 400MHz running Tiger quite good. I was…

Hi agg23, No I haven't been able to connect my Plus to internet so far... I have to keep trying anyway but I haven't many free time.

If I remember correctly, it was only true for 68k models (2GB limitation in ROM or something). Click to expand... Nope, Drive Setup in 7.6 and later installed the 'ruby' patch …

Hey Johnklos, Thank you for your response! I meant 5 volt rather than 5.5 volts - it was a typo - fat finger syndrome here hehe I was wondering because I have a CC modded wit…

Is there a way to figure out how much the maxium wattage would be per rail? :?: For example: - Maximum watts per 3.3v line - Maximum watts per 5.5v line - Total combined watt…