The OmniBook 300s are beautiful. Never been able to land one. Click to expand... I've got one of those... apparently, there is still a bit of a community for them. I've been co…

CF card in a PCMCIA adapter.

Nice... so the reseller in Singapore didn't actually have the cable they claimed to have. So I'm not out $25, but I also still have no way of getting stuff on or off of this syste…

Perfect. I've stopped using the OS 9 hard drive ( the other drive has Tiger ) after upgrading from OS 8.6 to OS 9 only because OS 9 would not get along with many of my audio/midi …

The 8500 Shipped with OS 7.5.x. I don't recoomend 7.5.2 but anything 7.5.5 or later (7.6.1 and 8.1 are perfect for a stock 8500) will do nicely. On G3 equipped 8500 I go for OS 9.1…

The OmniBook 300s are beautiful. Never been able to land one. I do have a OmniGo 700LX, but no phone for it, of course. I used a 95LX for a long time. A delightful little unit. …

Windows 98 SE can use wireless, if you buy an older card with drivers. I remember one time when mom brought home a State of Texas laptop from work. Damn thing had no Ethernet port …

Windows 95 means no wireless and no even remotely modern browsers. I'm going to put in a 128 MB stick and try either a trimmed version of Win2k or slackware. Id' do gentoo so I c…

The OmniBook 300s are beautiful. Never been able to land one. I do have a OmniGo 700LX, but no phone for it, of course. I used a 95LX for a long time. A delightful little unit.

Yep, not a problem. The PowerMac 8500 is supported by Apple to run any version of Mac OS from System 7.5.2 to Mac OS 9.1, including Mac OS 8.0, 8.1, 8.5, 8.5.1 and 8.6. (of course…

You mean Mac OS 8? Sure. A 9600 can even still do 7.x, the last Power Mac that could.

I can not recall if the 8500 can do 8.

I was at SalVal today, and found a small leather bag which contained a fully functional AST 280M notebook. Specs: Cyrix (Ha! Remember them?) 200GXM CPU 32 MB RAM 8" 640x480 colo…

Ouch! A replacement CD cable from the computer recycler in Singapore that (apparently) bought all the unsold stock was $25! That one cable cost me 6 times what I paid for the com…

Does anyone have the pinout for the internal keyboard connector on the PB1400? The one that I had declared "dead" works just fine hooked up to external monitor and kb/mouse with th…

Does anyone have the pinout for the internal keyboard connector on the PB1400? The one that I had declared "dead" works just fine hooked up to external monitor and kb/mouse with t…

I recently purchased two parts Pismos 400s that I have combined into one. I am not sure what I am going to do with it now that it is done (eBay, maybe), but I have a question about…

Good advice always, Bunsen, thanks. I'll post a progress report when the patient is off the table...

That's certainly a cheap fix. Be patient with the teardown, and keep track of your screws. BTW, in case it wasn't clear from LC_Guy's reply above, the "Kanga" G3 Powerbook logic …

If you want to make a trip down to Deptford I have a B&W board with a 400mhz chip you can have for free. I have a power supply too if you want it.

Thanks for everyone's comments. I think I'm ready to pull the switch on this! I will check and see if they have the 240mhz board; but for $20 + ship, the 200 may be the most cost-e…

[] ]'> [] ]'> [] ]'>

Thanks for all the info. Going to spend next weekend maxing out my Radius 81.

Good point, I had already tried it in the beige, though. It didn't seem break anything. I can't think of anything I did to mess up the B&W when installing the G4. When I w…

Ah yes, I forgot about the 240MHz model.