Oh, they're definitely 4mb SIMMs. I did a little searching and found that I was installing the SIMMs into the memory expansion card, and not the slots on the motherboard. So my n…

Sorry, it's a green wire. Although I'm pretty sure that doesn't matter

What is a Powertoggle? Click to expand... When you turn it on, wait for it to chime, and quickly shut it off and back on. It bypasses the need for a PRAM battery to be able to…

What is a Powertoggle?

The adaptor has no switches. I am away from home now. So I can't really get anymore details.

What sort of adaptor are you using? If you have an adaptor with DIP switches or a dial, you might want to adjust it to force the monitor to run at either 640x480 or 800x600.

I am pretty sure the display can display 800x600. The display is made by a company that starts with N I can't remember right now. I'll check later today and try resetting the PRA…

There is a (blue) wire soldered between the aluminium 'can' (looks like an oscillator - located by the power plug on the board) and the small square chip next to it. The capacitor…

Perhaps its a very early production model, and there was a part shortage at the time this machine was built? Or perhaps it could be a *very* late prototype? Does the board differ t…

Hi all, just bought a(nother) SE/30 on ebay, so I can practise with my imminent capacitor replacement for my 'proper' SE/30 running A/UX. The monitor's a bit ghosty and there's no …

What other resolutions does the LCD support? The Performa x2xx/x3xx internal video does not support 1024x768 - only 640x480, 800x600 and 832x624. If the display only supports 1024x…

butbutbut...the red one is even called "redline", which means it HAS to be fast - if you go past the redline, you blow the engine

So I have a Classic II with 4 mb of RAM. I got it open (finally) removed the old memory and installed 2 4mb 30 pin SIMMs. I power up the Mac, go to "About This Macintosh" and it …

So I have a Classic II with 4 mb of RAM. I got it open (finally) removed the old memory and installed 2 4mb 30 pin SIMMs. I power up the Mac, go to "About This Macintosh" and it …

I doubt this applies but my powermac is a real pita about VGA too, if you start that machine up without a monitor plugged in it defaults to the tv out, which means you gotta hook i…

So my Performa 6214 won't output video to my VGA screen. I know this adapter is good and it worked intermittentley on another screen, the screen I am trying to use is a 15" 1024x76…

Dude, let me take an inventory on my vintage stuff. Since I am downsizing my 68k/early-PPC stuff, I may end up having more adapters than I really have use for. I'm getting to the…

I'm sorry to say the orange goes faster. It also looks better. //wthww

I have the 840avs now. Well... They are sitting in the kitchen. However, at this point they are useless since i have no adapter for the video, neither a monitor to use it with. I…

The Powertoggle works with a normal slot adapter and AV video card, but not with my Sonnet upgrade card and the same video card. It chimes fine with the Sonnet card, but I get no …

I guess I'll just tell them it's defective (for my purposes) Click to expand... I thought the term was "fit for purpose", if you explicitly said you were going to use it with a…

I tried this monitor on my MDD 1.25 GHz for Tiger and the best resolution available was 1024x768! This monitor is going back to the store. I guess I'll just tell them it's defecti…

yea we have a vga lcd with that resolution at work, heck even getting windows XP to work with it is a bear and i never really found proper monitor drivers for it is is clipped and …

On a PowerBook 160 that I have been playing with this morning, I noticed, to my surprise, that if I turn off the 16 greys and set the Monitors Control Panel to display in B/W only,…

I have an 840av in nearly stock config, paired to an AudioVision display, which although "for" the x100 powermacs, works fabulously if you've got the correct adaptor. I tried 7.6.…