Adding an ICS9178 is also how one converts the Turbo601/66 into a Turbo601/100 (well more like 90 to 96). Click to expand... So, You're the one behind the Turbo601/66 chipping…

You know, yes original 601 ppc's look awesome.. but yeah.. was remounting the heatsink on my new 9150 board today and cracked the chip- why? because it doesn't actally touch the bo…

i had an imac slot load 500mhz fail from heat. I never could fix it so i trashed it. it would power up just fine, but then after a little bit, you could see the picture pulling in…

I've blown one PAV assembly in a G3/600 from excessive heat. The machine still worked, but it took a while to build up the required charge for a successful illumination of the tube…

The Rev A-D (233mhz-333mhz) had the internal fans. The ones with 350mhz or higher don't have fans. Having a 333mhz and 500mhz indigo the only problem I found was burning discs. I …

it wasnt much of a problem back then, but nowadays the hot-cold-hot-cold of convection cooling, or poorly fan cooled components have a tendency, and a strong one at that to break t…

your going to have to take a magnifying glass and light to the logic board. the smoke may had very well come from a circuit trace opening up like a fuse. seen it a few times. if it…

RAM went to hell? In my Classic, when one of the RAM modules went to hell I saw the same behavior. Each boot was a crap shoot.

Well, I plugged it in today for giggles, and whaddya know, I got a chime and the mouse screen. I get varying results though, like sometimes i get chimes of death, and once or twice…

I need to load Gauge Pro on my new Wallstreet to see if ASP was on crack when I checked the thing out. : It's gonna be Beater2 when I'm done loading utilities and drivers on th…

I recently obtained a Wallstreet II PDQ 300MHz running OS 9.2.2 with 192MB RAM & an 8GB hard drive with 4.6GB free. I have a G3 Pismo 400MHz running Tiger quite good. I was…

If I remember correctly, it was only true for 68k models (2GB limitation in ROM or something). Click to expand... Nope, Drive Setup in 7.6 and later installed the 'ruby' patch …

Hey Johnklos, Thank you for your response! I meant 5 volt rather than 5.5 volts - it was a typo - fat finger syndrome here hehe I was wondering because I have a CC modded wit…

Is there a way to figure out how much the maxium wattage would be per rail? :?: For example: - Maximum watts per 3.3v line - Maximum watts per 5.5v line - Total combined watt…

ohms law states w = I*V so for example 12 volts with a MAX of 5 amps = 60 watts (keeping in mind MAX means the most it can handle before killing itself, and really should not be …

Is there a way to figure out how much the maxium wattage would be per rail? :?: For example: - Maximum watts per 3.3v line - Maximum watts per 5.5v line - Total combined wat…

C4 10 16v

I just saw this thread. I have an external DVD-RAM hooked up to my SuperMac S900...I know I thought about hooking it up to my Quadra 700, and I can't rememebr if I did (or didn't),…

i put a PCI based logic board in there and it works fine. only the original logic board does it. even after capacitor replacement. dunno. oh well. I have another logic board of the…

Some trs80's required hard sector disks. Click to expand... No TRS-80 used hard sector disks. (Speaking here as a former owner of examples of both the Model I/III/IV and Color …

I seem to recall that it requires hard sectored disks Click to expand... Some trs80's required hard sector disks. I just bought 50 dd 3.5in floppies off them.... $75aud...

there is some graphical characters on a apple II but most of the graphics is real graphics, maybe there could be a driver to output graphics to serial made, and for a ton of progra…

Any reason you couldn't just use it over the serial port as though your modern desktop were a terminal connected by serial to the machine? Click to expand... If all you're look…

Any reason you couldn't just use it over the serial port as though your modern desktop were a terminal connected by serial to the machine? Then you could have whatever font you wa…

why not just use an sram chip with another avr microcontroller to copy video memory into and just have the ATmega 328 read the sram for video data? Click to expand... I guess y…