Use to have this problem on CRT monitors when using certain adapters, or having the refresh rate set to a rate the monitor could not deal with. Problem was fixed by simply changing…
Can't beat the price!
If you end up with an empty 5x0 after all this, hands up for the shell.
Click to expand...
I would like to see a picture of your workshop, Bunsen. And a …
68kMLAHardwareby Dennis NedryFri, 2 Oct 2009 - 19:09
Haha
So I go and switch my 840av on... & the screen is about an inch off to one side!
It's catching!
....
You know, I have a pc lcd monitor & the monitor ada…
68kMLAHardwareby vassilizaitsevFri, 2 Oct 2009 - 07:49
Wouldn't be surprised if half the comrades don't get it and the other half prolly' don't give a rodent's rear about this kind of idiocy. Glad to have some support from the gang, co…
Picked up a stash of Mac gear yesterday, here is a rundown:
- PowerMac 8600, looks complete, "purple" G3 233MHz upgrade as well as the original CPU card, unsure of RAM/HDD etc;
-…
#1 won't work, because I think you can't run an Ultra-320 drive on the LC's PSU. (power constraints, etc.)
#2 is too big to fit.
Click to expand...
Whats the bigest that'll fit…
68kMLAHardwareby macgeek417Fri, 2 Oct 2009 - 00:48
Would this one work w/ a 68-50 adaptor?
NEW Seagate 73GB Hard Drive - ST373207LW
SCSI Ultra320 - 320 Mbps - 10,000 RPM
Seagate Model / Part # ST373207LW
Capacity: 73GB
Rotatio…
68kMLAHardwareby macgeek417Fri, 2 Oct 2009 - 00:38
The power supply in the LC III might be too tiny to support such a high-capacity drive.
Click to expand...
I've been running a 9.1 GB 50-pin SCSI Seagate in my LC 475 for quite…
Ah jt, good to see you getting back to your old mischief :b&w: I'll be watching with interest, but you knew that
Click to expand...
HeHeHeHe!!!!!!!!!!!!!!! :lol: CO…
68kMLAHardwareby Trash80toHP_MiniThu, 1 Oct 2009 - 22:50
Mac OS 9.x will run on a 6100, but is tricky to install. You need a retail install CD (ie a full generic install disk, not a model specific disk) and to boot from the CD. You can't…
The 6100 supports up to 9.1, but you must install it from a 9.1 disc. You cannot boot a 6100 from a 9.0 install disc (even a retail one), so you can't install 9.0 or update to 9.1 …
Mac OS 9.x will run on a 6100, but is tricky to install. You need a retail install CD (ie a full generic install disk, not a model specific disk) and to boot from the CD. You can't…
68kMLAHardwareby CharliemanThu, 1 Oct 2009 - 18:36