Just a little advice - be CAREFUL with that HDD ribbon! I accidently tore one once a couple of years ago when I was switching HDDs in my 1400 - thank God I had a parts machine to g…

Well, that would have happened by some good old fashioned yanking it out Then I realised I probably wasn't meant to do it that way; thankfully the HD ribbon is super-tuff and u…

How did you get the original HD out?

Hi, I picked up an "as is" Powerbook 1400cs/166 from eBay for ~ $25 BIN, untested. It arrived tonight with the specs of stock 16MB RAM/1.3GB HD, floppy drive, and Newertech ether…

Thanks very much for these - was watching the oracle cd on ebay, and I was disappointed when it went. So, I'm now about to get an RDBMS on an A/UX SE/30. Imagine the time this is …

Any one out there need a copy of this driver? Click to expand... Apparently, I do. :-/ Can you email it? If so, I'll PM you my email address... Peace, Drew

So the XLR8 driver worked for the Vimage G3?

I completely forgot how easy it was to network 2 macs using the printer ports. I pulled the driver I needed off of the floppy I had from a 190cs. The 1400 runs so much faster wit…

I've got A/UX 3.0, Oracle Server for A/UX, System 7 Golden Master release and System 7 beta for download. I sold them and want to share them before they sit on a shelf forever. I a…

Did you try the link to the Vimage driver Click to expand... I get: Error Message: The specified database was not found Error Code: -609

Did you try the link to the Vimage driver I posted above? Peace, Drew

I finally installed a new HD, 8.6, and attempted to hunt down Vimage drivers. No luck except for a .img that did not work. So I tried the xlr8 drivers and boom, unhappy mac with …

I have changed my mind about the 1400c, ever since I got my Acer Aspire One... Perfect computer for me!

A great feature of xpostfacto is the possibility/necessity to use any disk supported in the early boot process as a helper disk and to boot afterwards into any other disk supported…

You can also run Jaguar natively on the machine as it was supported. I too have had many problems with running the bus at 83MHz and using more than 1 HDD, which is sad because the…

Cubes are fun machines. When you put it all back together, was everything nice and tight and all cables run in their appropriate channels? Due to their compact design, things c…

Hmm I have one of of those little gems, and I can tell you they are very nice indeed. However I have mine now in the back room gathering dust after my cat walked across my keyboar…

Tick the box that says don't automount this volume in properties?

I recently picked up an Apple IIc with monitor, and although the IIc is working perfectly the monitor appears to be completely dead. Having stripped it down I've discovered that th…

When I connect it to another machine in SCSI Disk Mode, only the 4GB partition shows up, and I can transfer data to and from it with no problems.If you should try this, and both pa…

I see absolutely no signs of a 6 GB hard drive limit. I'm using a 40 GB hard drive (Apple ROMed) in mine. Click to expand... There is a 4GB limit for SCSI Disk Mode...if you ha…

These upgrade cards, their speeds, the differences between them, etc. is probably the most well documented of the powerbook upgrades out there. Compares Sonnet's upgrade cards: h…

Interesting. Is there an objective, side-by-side analysis of 1400 upgrade cards that show performance, heat, and power impacts? I've also got a 333 MHz Sonnet card that I bought …

I know this is a bit off topic, but the 233 Vimage G3 upgrade, IMHO, is not worth the effort. It runs too hot and bleeds the battery. All the best. Click to expand... The batt…

I know this is a bit off topic, but the 233 Vimage G3 upgrade, IMHO, is not worth the effort. It runs too hot and bleeds the battery. All the best.