I have found a Portable Backlit without hard disk with a full memory expansion. It has these sympthoms: - without battery it boots well but after booting I get this message "No b…

The IIfx doesn't seem to want to boot properly now. I get the chime but nothing else. It doesn't attempt to access the hard drive or the disk drive (it did the first time I turned …

I assume that only works if you have the Radius drivers installed. Click to expand... Nope. This feature is built into the firmware on the card and happens (IIRC) before the …

A lot of SuperMac and Radius cards were for specific proprietary monitors, though many were capable of multiple resolutions with proper software & inits. Click to expand…

Again, thank you H3nry for your assistance. I've tried Mode 5 VGA 640x480 - separate sync. Result: green screen. I've tried Mode 5 on other resolutions: same old story. Either no …

So I can take for granted that the card I posted in question is an XCeed Color 30HR, and that the white 10-pin connector is for a greyscale adapter? Somewhere on line I saw a post…

Bunsen has not only participated in this thread, but he is also in the Global Moderators Group. So if anyone has the power to make this a sticky, it should be him.

Analog Board Connector 1 -12 V input 2 GND 3 4 5 ADB Power supply 6 GND 7 Power off command 8 GND 9 Composite signal output 10 GND 11 Video signal output(Blue) 12 GND …

Sorry to keep bumping this up. Can the moderators or site admins please make this a sticky in the Classic Macs area? Thank you. 73s de Phreakout. :rambo:

You're a bit vague on the details. Are you getting a shock when your hand is placed right in front of the screen? If that is true, then I would agree with tomlee59. But if you h…

The IIfx doesn't seem to want to boot properly now. I get the chime but nothing else. It doesn't attempt to access the hard drive or the disk drive (it did the first time I turned …

OK, try "mode 5 VGA 640x480" separate sync. Avoid mode 6, sync on green, is what I meant to say. If the picture won't stop rolling / tearing, the monitor may require SOG (mode 6) b…

Ok So my screen has those diagonal lines and I notice that the screen has like a lot of static electricity in it. I had my hand on screen and turned it on and it zapped the %#$&amp…

At ThinkGeek they used to have a Static Electricity discharger I always use for computers and the like... And how about Static Spray?

I'd recommend switching out analog boards before you try to use it again. Try to find a working SE/30 analog board to use while you deal with the one in the machine now. And, if …

There's also the Nubus Mafia at Applefritter.

Nope, if you can boot and get the machine to start recognizing the adb keyboard for the option key, it does just that. Puts up a rotation of screens and tells you the resolution a…

I assume that only works if you have the Radius drivers installed. You may find more information on your card here: http://www.lowendmac.com/video/ Click to expand... That was my…

I've seen floppy drive cleaning kits kicking around the dollar stores, still. They seem to consist of a normal 3.5" floppy casing with a "disk" made out of fabric, and a small tub…

Go out and find a nice Sony Trinitron, they all seem to SOG just fine.

I assume that only works if you have the Radius drivers installed. You may find more information on your card here: http://www.lowendmac.com/video/

http://68kmla.org/wiki/SCSI_harddisk_replacement_options

H3nry, thanks for trying to help. The monitor has no apparent way to accept sync on green. I've navigated the On-Screen-Display menu and explored every possible setting, but most …

This is a problem located on the logic board. Click to expand... After further thought, there is also a slight possibility that the problem does lie in the shell or dirty logic…

Woah, that's nasty! That should not be happening!