Now I can't save as QT movie and then try to open it like you did because the QT plugin under all three browsers asks me to pay for QT Pro upgrade, but I did try all three browsers…
I'm thinking the problem is Quicktime plugin being stupid under Safari...
My Pismo
10.3.9
400 MHz PowerPC G3
256 MB SDRAM
Trying to play your movie on your problem, by viewing…
Whee, I made a video of exactly what's going on here:
http://augusf.dyndns.org/public/qtissue.mov
If anybody has any ideas, I'd be happy to hear them; it's really rather annoying…
Hey, I have a Pismo battery that is shot, but since I have a couple spare clamshell batteries around i thought "their connections are the same, so lets try and do a swap.
The fir…
I moved the Rage128 to the slot nearest the IDE connectors and so far it works.
On to locating an ATX case to hack up and locating a hard disk larger than 3.2GB...
Thanks for the reply, sircabulon.
I think you're right - the card is toast. I tried it again in the 66MHz slot, and this time I got some video, but it was the same corrupted video…
The 66 mhz slot should not effect it. If the card can fit into the slot normally, then it is rated for that speed. Are there any broken or loose solders on the VGA connector? I …
(1) Beige G3, ATI Rage 128 PCI video card, 17" Apple blue and white CRT monitor: works great.
(2) Power Mac G4 "Yikes," with either of two similar ATI Rage 128 PCI video cards, an…
yes it cantake non low profile sticks its the only Beige G3 that can cause there is allot of room above the ram. i just hope you dont mean high density and low density ram, cause t…
I tried it in the slot next to the shortest one. After moving it to the slot nearest the IDE ports the video appears OK on the Mach64 PCI card. The Rage128 card is still not work…
Have you tried the video card in the slower 33 mhz PCI slot instead of the 66 mhz one? My mach 64 wouldn't play nice in the faster slot but was ok in the slower.
The first time the Mach64 video card was used the picture was fine. Now it is garbled. The Rage128 card still shows no video. I did find a Radeon 7000 32MB card that should be fl…
Shortly after buying my Blue/White G3 the motherboard was replaced with a Revision 2 motherboard. After disappointing results with my Beige G3, I thought I would try to get the or…
For the record:
1400, 5300 and below: 16 bit PC Card/PCMCIA only
2400, 3400: 32 bit Cardbus capable but require a hardware hack
Kanga: As 3400 I think
Wallstreet and above: C…
update : it works i bought a sitecome usb 2.0 cardbus card and it works just fine
jaguar doesnt reconigse the vendor but it reconigses the usb ports and uses them
Cl…
For the record:
1400, 5300 and below: 16 bit PC Card/PCMCIA only
2400, 3400: 32 bit Cardbus capable but require a hardware hack
Kanga: As 3400 I think
Wallstreet and above: …