I saw some rev a units going for 5 a piece at a thrift store not too long ago.

I recently obtained a Wallstreet II PDQ 300MHz running OS 9.2.2 with 192MB RAM & an 8GB hard drive with 4.6GB free. I have a G3 Pismo 400MHz running Tiger quite good. I was…

Looking back at this article after finding an original Bondi Blue iMac (not sure of the revision) at a school it made me wonder. That ebay auction did end up selling for $350 but …

If I remember correctly, it was only true for 68k models (2GB limitation in ROM or something). Click to expand... Nope, Drive Setup in 7.6 and later installed the 'ruby' patch …

Hey Johnklos, Thank you for your response! I meant 5 volt rather than 5.5 volts - it was a typo - fat finger syndrome here hehe I was wondering because I have a CC modded wit…

Is there a way to figure out how much the maxium wattage would be per rail? :?: For example: - Maximum watts per 3.3v line - Maximum watts per 5.5v line - Total combined watt…

ohms law states w = I*V so for example 12 volts with a MAX of 5 amps = 60 watts (keeping in mind MAX means the most it can handle before killing itself, and really should not be …

Is there a way to figure out how much the maxium wattage would be per rail? :?: For example: - Maximum watts per 3.3v line - Maximum watts per 5.5v line - Total combined wat…

http://www.box.net/shared/6eo0qjhyst That's G4FanControl 0.5. Under Leopard the UI itself is pretty useless (although you may have better luck), otherwise the command line version…

Hello, Apparently Hugh is no longer on this forum. Can anybody that he sent the g4fancontrol 0.5 to please send me a copy? PM me and I'll send you my email to send it to. Thanks.

C4 10 16v

I just saw this thread. I have an external DVD-RAM hooked up to my SuperMac S900...I know I thought about hooking it up to my Quadra 700, and I can't rememebr if I did (or didn't),…

i put a PCI based logic board in there and it works fine. only the original logic board does it. even after capacitor replacement. dunno. oh well. I have another logic board of the…

I contacted yourmacstore and they were able to dig up a last kit for me, doesn't sound like they have more. Contacting Spirica might be the only way now.

Some trs80's required hard sector disks. Click to expand... No TRS-80 used hard sector disks. (Speaking here as a former owner of examples of both the Model I/III/IV and Color …

I seem to recall that it requires hard sectored disks Click to expand... Some trs80's required hard sector disks. I just bought 50 dd 3.5in floppies off them.... $75aud...

there is some graphical characters on a apple II but most of the graphics is real graphics, maybe there could be a driver to output graphics to serial made, and for a ton of progra…

Any reason you couldn't just use it over the serial port as though your modern desktop were a terminal connected by serial to the machine? Click to expand... If all you're look…

Any reason you couldn't just use it over the serial port as though your modern desktop were a terminal connected by serial to the machine? Then you could have whatever font you wa…

why not just use an sram chip with another avr microcontroller to copy video memory into and just have the ATmega 328 read the sram for video data? Click to expand... I guess y…

Can the expansion cards access all of the normal system memory? Click to expand... Yes.

Can the expansion cards access all of the normal system memory? If so, you could certainly access the video ram directly. Otherwise, why not just use an sram chip with another avr …

if you want to spider-web your apple with 30 gauge jumpers maybe you could only do low rez then yes, but your still sampling the video data and then post processing it to output, s…

Making an add-in card to replace the onboard video out and having it read the video portion of the ram makes more sense than trying to capture the output frame by frame. Perhaps it…

ok few things 262.5 lines Click to expand... most of the text I casually looked up suggested 262 lines, with the time of the "extra half line" being the gun sweeping bac…