Anyone using the ProMax Digital Video Editor on G3? Please respond with your review/critique. Thanks.

I have a G3 300 w/UW SCSI, and recently added a 6GB maxtor drive as slave to the CD-ROM and it works great. What I would like to know is, it is possible to add another IDE drive? R…

The ide bus can only have 1 master and 1 slave on the chain. If you want more IDE drives, you need a second IDE connector from a 3rd party card. JohnW

Hello, I wonder is there any place I can buy a 7"NuBus A/V card for my PowerMac 6100/60? Thank you

Can anyone tell me how to use my iMac as the monitor on my G3 tower. I have heard it to be done, and need to know how.

Now I have never done this and never heard of it being done but I know that if you take the bottom casing off of the iMac that the monitor cable is there. I guess you can connect …

All this talk about overclocking has me wondering what I can get out of my beige G3/266 Minitower. Anybody tried that?

I too wouldn't wind knowing how to get my Beige G3/300 MT upto 333Mhz if possible. I've seen how to get a 233 faster but never the 300.

Well, subject pretty much says it all. Does anyone have experience with putting a Mac in a new case? I have a 7300 that I'd like to put into a big tower so that I can add more driv…

Hi, you can put the 7300 in any ATX Style case. Apple just used a form factor near ATX. The only thing to do is to make your own I/O shield in the back of the case, because most A…

Does anyone know how to change the duplex setting of the built-in 100BaseT ethernet from the current HALF duplex to FULL duplex without having to get another NIC from another vendo…

Ckeck your hub setings, I run a Macsence switch and I get default full duplexing. If your hub only handles half then the card will sence and switch to a half duplex. -------------…

Just reading the docs on the onboard NIC and the secret is that your hub needs to be autosensing and full duplex capable. Meet those conditions and the B&W will connect at 100B…

I have a powerbook G3 233/14.1 and am looking for a speed bump that will not hurt my processor, does anyone have any successful configurations?...

My opinion....All processors are the same, only rated for performance. Meaning, chips may qualify for the 400MHz range but released as 300-50MHz models based on performance ratings…

Hello All! I'm on the verge of buying a Performa 6360, because I can get a really sweet deal on it. The one thing I'm worried about is that I went to Micro Conversions' web site,…

I'm not sure of this but it may be because your 6360 only supports 5 inch PCI Cards and the Voodoo2 is a 7 inch.

I own a Performa 6360 and was going to purchase a video card however I decided to sbegin saving up my money to by a new Power Mac. When I was looking I found that only the ATI RAG…

Has anyone heard if Apple will be shipping the new G3s with 250 MB zip drives anytime soon?

I was just noticing that people are overlooking a great resource for info on G3 overclocking: <A HREF="www.xlr8yourmac.com">www.xlr8yourmnac.com</A>. They have great st…

External video from S-Video output no longer works on my PowerBook. Tried PRAM reset, reinstalling from CDROM disc, then finally restored system folder from a backup created when …

The 9 GB hard drive on my brand-new B&W 400 mhz crashed and was diagnosed by Apple tech support as "dead". It was replaced under warranty by an Apple certified service dept. B…

Yes, that is probably right. 8.5 GB 8.5*1024 = 8704 MB 8704*1024 = 8912896 KB Most people just look at the 8912896 KB and call it 9 GB (when it really is only 8.5 GB) because they…

I have a B&W G3/350(running at 400). I have the stock Rage128 card w/DVD decoder. I added a second card(Xclaim 3D Plus) with tv out. The DVD software cannot see the DVD decoder…

Ok, I got both cards working, but when I try to get the DVD output to the tv, either with mirroring on the viewer window turns white and you cant see the video, or by trying to mov…