Well I braved the tube today and got it straight. It's not 100% but it's better than it was. One question though, how much of a black bar should there be around the picture? I k…
68kMLATroubleshootingby tomlee59Fri, 19 Feb 2010 - 07:46
The backlight inverter in the Portable makes a high pitched whining sound when the backlight is on. Since converting mine to a solid state hard drive, that noise seems much louder…
The cable is correct---it has the joystick connector as well as the floppy connector. I have the floppy controller set up in slot 6, but when I tell the emulator to boot from slot …
68kMLATroubleshootingby mainlandFri, 19 Feb 2010 - 05:15
There are adjusters on the analog board for raster height, width, and H & V position. They are identified by icons & arrows which indicate which way they change the…
68kMLATroubleshootingby H3NRYFri, 19 Feb 2010 - 05:11
I'm assuming and hoping this is not a repack sealed box...
First does your cable have two ends on it? One with a little joystick icon, and one with a floppy disk?
If you have th…
68kMLATroubleshootingby ppuskariFri, 19 Feb 2010 - 04:32
Well I braved the tube today and got it straight. It's not 100% but it's better than it was. One question though, how much of a black bar should there be around the picture? I k…
68kMLATroubleshootingby TempestFri, 19 Feb 2010 - 03:11
I recently acquired a NIB Apple IIe card and put it in a Quadra 605. Everything works just fine, except when I tried to hook up a 5.25 floppy drive (A9M0107), the IIe card doesn't …
68kMLATroubleshootingby mainlandFri, 19 Feb 2010 - 01:59
Yes POST MORE PLEASE! GREAT STUFF!!
Just started listening and already Lens 2 makes me want to drag out Dungeons and Dragons and Immortal GS!!! Or at least the chord structure …
Also, just missed out on a Lombard that went for 21 pounds (I bid 20). I think it was a Lombard, I spent hours looking at pics and specs trying to find out.
http://cgi.ebay.co.uk/w…
ok lets start again.I found a color classic on new zealands ebay trademe.co.nz
it would not boot..
so when it came i looked inside bad caps.
replace the caps and booted it up …
Thank you all for the replies. I'm a work now so I'll have to open it up later. The seller offered me a partial refund or to take it back entirely. You think I should hang onto it …
Could be, or a Pismo. If in doubt, ask them to turn it over and read the specs off the compliance sticker on the bottom.
Click to expand...
The thing is, I don't like to ask q…
Thank you all for the replies. I'm a work now so I'll have to open it up later. The seller offered me a partial refund or to take it back entirely. You think I should hang onto it …
68kMLAHardwareby SnickterPThu, 18 Feb 2010 - 21:56
Could be, or a Pismo. If in doubt, ask them to turn it over and read the specs off the compliance sticker on the bottom.
Seems like they go cheap if the seller a: does a ba…
Also, just missed out on a Lombard that went for 21 pounds (I bid 20). I think it was a Lombard, I spent hours looking at pics and specs trying to find out.
http://cgi.ebay.co.uk/…
1 can a dead pram battery(3.6v) stop the hdd from working2 Network Access Disk image. dose it see hdd's
Click to expand...
Possibly but you should have tested that right off th…
3 to 4 hours last time on the Indigo, swapped the hard drive out (hence the Tiger donar for the Blueberry) + changed the CD drive for a combo.
I wish I'd thought of doing the FSB …
Now display seems to always lit.
When it is lit I hear a noise. Is it normal?
But I continue to get this message "No battery reserve power remains. The Macintosh will go to sleep…
It definitely sounds like a bad capacitors issue, which also is associated with Simasimac. Symptoms include low volume or no sound at startup, zebra-like pattern, checkerboard or …
68kMLAHardwareby phreakoutThu, 18 Feb 2010 - 16:32