So YOU perhaps are to blame for that blasted 1/4 tracking and spiral encoding??? } If worse comes to worse, I still have my hardware Copy Option Board Deluxe stuff in a PC som…

I figured I'd better start a different thread about this issue as the monitor thread wasn't really appropriate. If the mods feel otherwise feel free to close this thread. The top…

Yeah I'm still having problems with the booting. I put new batteries in it and get the starting chime, but nothing after that other than a click or two. I tried resetting the PRA…

I read on here a couple of months ago from one of the resident technologoi that the termination supplied by later 50-pin scsi drives is usually sufficient for a IIfx; the black ter…

t's been a long long time since I had the jailbreak a piece of 5.25" software :0 Click to expand... Me too! SInce I really don't want to clone a copy-protected disk, Locksmith …

searching "macintosh IIfx terminator" fourth link down brings up an old apple doc http://support.apple.com/kb/TA42169 searching "apple part number 590-0705" second link brings up…

ASCII Sort Order Chart: http://www.google.com/url?sa=t&source=web&ct=res&cd=1&ved=0CAgQFjAA&url=http%3A%2F%2Fwww.ddms.com%2Fresources%2Fhel…

Doesn't a tilde work? ~ (shift-backquote)

. . . I never did find out what was so special about it. I'm thinking maybe it is some sort of pseudo active termination? ties back the 5v line to pretend to be active termina…

If no one gets to it first, I can at least photograph it for you. I was luck enough to get one in a random conquest a year or so ago. Now I have 2 dead iifx machines (battery acid…

Awesome collection you have there! I'll see about going back to some of the old Computists I found online as well as anything in the myriads of the Copy II+ software and Softsmith…

Does someone have a picture or better yet specs of the legendary black IIfx terminator? My IIfx didn't come with one so I'm either going to have to buy one, find a compatible one,…

Here's some syncing info on the IIci/IIsi: http://www.applefritter.com/node/6301 Some people say it's sync on green, then another guy disagrees, etc. So it could be an interesti…

Beware that some (many?) LCD monitors won't like the 67hz sync-on-green signal that comes out of a IIci. Click to expand... If you find a Mac to VGA adapter with DIP switches, …

Phooey! I used a 21" SuperMac bottle with my Q950's built-in video, but it "just worked" so I never had to delve into the mysteries deeply. Next time I fire the old beastie up, I'l…

I'll make this a separate topic. I have just about all Syntauri software, I think, but some floppies have partially bad files, and stuff needs to be copied to new disks. At one tim…

I have found a Portable Backlit without hard disk with a full memory expansion. It has these sympthoms: - without battery it boots well but after booting I get this message "No b…

Do you know of any specific models that are 1280 x 960? Click to expand... Some 1280x1024 monitors (the standard pixel density for non-widescreen 17" monitors) will scale 640x4…

The IIfx doesn't seem to want to boot properly now. I get the chime but nothing else. It doesn't attempt to access the hard drive or the disk drive (it did the first time I turned …

I assume that only works if you have the Radius drivers installed. Click to expand... Nope. This feature is built into the firmware on the card and happens (IIRC) before the …

A lot of SuperMac and Radius cards were for specific proprietary monitors, though many were capable of multiple resolutions with proper software & inits. Click to expand…

Again, thank you H3nry for your assistance. I've tried Mode 5 VGA 640x480 - separate sync. Result: green screen. I've tried Mode 5 on other resolutions: same old story. Either no …

Thanks for the tip it sounds like a good idea but I can't find one of these items. Everything out there seems to be 1280x1024 native resolution. Do you know of any specific model…

Bunsen has not only participated in this thread, but he is also in the Global Moderators Group. So if anyone has the power to make this a sticky, it should be him.

Analog Board Connector 1 -12 V input 2 GND 3 4 5 ADB Power supply 6 GND 7 Power off command 8 GND 9 Composite signal output 10 GND 11 Video signal output(Blue) 12 GND …