Search titles, bodies, and author names
Found 31,558 posts across 1 forum.

upgrading Apple Colour Classic — #5

That's great -- you're going to love that upgraded CC. You'll be able to watch Cinepak-encoded video at quite-respectable framerates. I used to have a 575 playing "Forbidden Planet…
68kMLA Hardware by tomlee59 Fri, 5 Feb 2010 - 06:00

Deep IIci rejuvenation, possible ROM select problem — #9

I've played with this a bit, but it appears that the onboard ROM address/data pins are not directly connected to those pins in the ROM SIMM slot. Click to expand... WRONG All …
68kMLA Hardware by Dennis Nedry Fri, 5 Feb 2010 - 02:50

Wanted: Advice on performing 68040 upgrade for Q605 — #13

Hi trag, Yes, I've modified Q605, not LC475, althoug I've put a jumper on the MB after I went to 40 MHz, which changed its gestalt ID to LC475. At first I swapped resistors to go…
68kMLA Troubleshooting by ojfd Thu, 4 Feb 2010 - 21:51

Deep IIci rejuvenation, possible ROM select problem — #8

Dennis, I think you mentioned in another thread that your IIci is working well now except that you still must have a ROM SIMM installed for it to boot. If you are up for some tediu…
68kMLA Hardware by Dennis Nedry Thu, 4 Feb 2010 - 21:38

4x Quadra 9xx — #16

Quadra 950 and WGS 95 actually share the same ID so in System 7 About Box both are indetified as Quadra 950 ...
68kMLA Hardware by slomacuser Thu, 4 Feb 2010 - 19:56

4x Quadra 9xx — #15

You can turn off the memory check btw if you got the apple 601 card in a quadra. Involved some cmd + alt +ctrl + shift action when opening the CPU toggle control panel. Can´t remem…
68kMLA Hardware by Bolle Thu, 4 Feb 2010 - 17:55

Deep IIci rejuvenation, possible ROM select problem — #7

Dennis, I think you mentioned in another thread that your IIci is working well now except that you still must have a ROM SIMM installed for it to boot. If you are up for some tedi…
68kMLA Hardware by trag Thu, 4 Feb 2010 - 16:34

Wanted: Advice on performing 68040 upgrade for Q605 — #12

nb: 40MHz is not always stable though. A heatsink/fan for the 040 would be a good idea. Click to expand... I can confirm it - at 40 MHz heatsink is a must and you should use a…
68kMLA Troubleshooting by trag Thu, 4 Feb 2010 - 16:28

1.25ghz eMac, What are my options? — #27

Well we ended up stripping it and trashing it. It had tons more problems (Not caused by my cap replacement) and just was not worth fixing.
68kMLA Hardware by Mars478 Thu, 4 Feb 2010 - 13:15

IIci - Bringing back my 1st Mac — #24

Success!!! Cleaning up all of the flux after all of the soldering took the longest. The soldering itself was not too bad. There were one or two pads that had corroded a bit …
68kMLA Hardware by IIciNov90 Thu, 4 Feb 2010 - 02:29

Wanted: Advice on performing 68040 upgrade for Q605 — #11

If you can't find a socket with clips, you can get something like Arctic Silver thermal adhesive: http://www.newegg.com/Product/Product.aspx?Item=N82E16835100005&cm_re=arc…
68kMLA Troubleshooting by johnklos Wed, 3 Feb 2010 - 23:43

Wanted: Advice on performing 68040 upgrade for Q605 — #10

nb: 40MHz is not always stable though. A heatsink/fan for the 040 would be a good idea. Click to expand... I can confirm it - at 40 MHz heatsink is a must and you should use a…
68kMLA Troubleshooting by ojfd Wed, 3 Feb 2010 - 22:57

PowerBook 150 Failure. — #25

FYI, I also have two working 150s, one with the display bezel in bad condition, but otherwise fine; the other in good to very good condition. I still have one power supply too. Be …
68kMLA Hardware by J English Smith Wed, 3 Feb 2010 - 22:29

Disclaimer: MacTrove does not claim rights to any software on the site. To the best of our knowledge, these titles have been discontinued by their publishers. If you know otherwise, please contact us and we will remove them accordingly. Thank you for your attention.