IIRC, that was a problem with specific drives in the 30-40 GB (that size only because that was current in '03/'04) range for the 2400c, 3400c, Kanga, and Wallstreets. OWC had a pa…

I certainly could not get an ATA-6 drive to work in a 2400c recently, and had to downgrade to an older drive that I had to do some hunting to find (as it needed to be quiet). The 2…

I know these Duos are IDE and SCSI- would that cause an issue for this mod? Click to expand... In it's stock config, the 2300c uses an IDE hard disk - I've put a 10GB in mine. …

The 3400 should theoretically be able to use any HDD under 120GB. It should even be able to use HDDs over 120GB, just that it'll only recognise the first 128GB.

I come bearing hard drive questions. I need to put a new HD in my 3400c, but I recall hearing once that some ATA-6 drives don't work with that series, does anyone have more data on…

I'm impressed. Especially on how nice the external case looks. I actually salvaged all the Indigo Blue parts from my old 350Mhz, and I'm thinking about polishing them up a bit. Som…

Standing tall. Restoration complete. I've officially named her "Kiva", after the development codename for the last generation Summer 2001 750CXe based iMacs. Now I just need to pi…

6:53 PM The iMac is reassembled and seems to be taking well to the new CRT. The logic board eventually came good after a few resets (and after properly attaching all screws, go fi…

Well, it looks like the fault is in the PAV board itself. Not dead, but still very weak. Solution? The "donor" system arrived today. It's an Indigo G3, case is pretty scuffed but…

Yeah, I have first hand experience with a broken tube.. Still alive to this day.

Yes, when not discharged a CRT can hold up to 27,000 volts. However, there's also an even bigger risk of the CRT neck (which is VERY fragile!) being cracked or broken if handled in…

I hope this doesn't seem like thread hijacking. It's kinda related... What are the risks of disassmbling an iMac down to the CRT? I'm always heard that CRTs are oh-so-dangerous be…

iMac600, if you need parts, let me know. I've got a iMac DV SE with 500 Mhz G3, Firewire 400, that currently has a bad P.A.V. Board I need to get rid of. It's either that or I've…

...is knock, knock, knockin' on heavens door. Since i've owned it, predating even my involvement on these forums, it's been a loveable old machine with CRT problems. The display f…

Sounds like the hard drive.

Holy crap that's a loud and scary noise! It's definitely a fan or a drive.

You're not kidding when you say "broken engine"... sounds like a spun bearing in a V6 engine. Diagnose it like a broken engine then. Open the case wide open, start the machine up …

I see nothing in the fan.

You've got something in the fan… I wouldn't worry that much, since you can hear the startup chime. What's going on, apart from the noise? Does the computer boot? A QUicksilver case…

8-o Did it eat your chips? ;D

Well, I was working in OS 9, it crashed and then I heard this horrid Mechanical Fail Noise. I unplugged it. I plug it back in, and it is the WORST failure sound I ever heard. htt…

Thank you all. This is very helpful. The gist of it in my judgment is that the re-celling of a 2400c battery would be slightly speculative, but worth the price of speculation in t…

Best I can tell the controller boards are all custom but the heart of the intelligence is in chips that can be custom or commercial parts. The intelligent battery controller in th…

You might also want to search this forum for Wally's posts on this subject. He's done the most thorough experimentation and research of anyone I know. I'll briefly share my experie…

http://lowendmac.com/ed/hatchett/08jh/rebuilt-laptop-batteries.html http://lowendmac.com/ed/hatchett/08jh/inside-powerbook-battery.html