You can also run Jaguar natively on the machine as it was supported. I too have had many problems with running the bus at 83MHz and using more than 1 HDD, which is sad because the…

Cubes are fun machines. When you put it all back together, was everything nice and tight and all cables run in their appropriate channels? Due to their compact design, things c…

Hmm I have one of of those little gems, and I can tell you they are very nice indeed. However I have mine now in the back room gathering dust after my cat walked across my keyboar…

Tick the box that says don't automount this volume in properties?

I recently picked up an Apple IIc with monitor, and although the IIc is working perfectly the monitor appears to be completely dead. Having stripped it down I've discovered that th…

I have iBook screws, so nothing to worry about in that aspect.

Just for the hell of it, I decided to look into this problem again. I was FINALLY able to get all of my data off the drive that was in there, when it crapped out. So I stuck it bac…

Just for the hell of it, I decided to look into this problem again. I was FINALLY able to get all of my data off the drive that was in there, when it crapped out. So I stuck it bac…

When I connect it to another machine in SCSI Disk Mode, only the 4GB partition shows up, and I can transfer data to and from it with no problems.If you should try this, and both pa…

Just for the hell of it, I decided to look into this problem again. I was FINALLY able to get all of my data off the drive that was in there, when it crapped out. So I stuck it bac…

I see absolutely no signs of a 6 GB hard drive limit. I'm using a 40 GB hard drive (Apple ROMed) in mine. Click to expand... There is a 4GB limit for SCSI Disk Mode...if you ha…

These upgrade cards, their speeds, the differences between them, etc. is probably the most well documented of the powerbook upgrades out there. Compares Sonnet's upgrade cards: h…

Interesting. Is there an objective, side-by-side analysis of 1400 upgrade cards that show performance, heat, and power impacts? I've also got a 333 MHz Sonnet card that I bought …

I know this is a bit off topic, but the 233 Vimage G3 upgrade, IMHO, is not worth the effort. It runs too hot and bleeds the battery. All the best. Click to expand... The batt…

I know this is a bit off topic, but the 233 Vimage G3 upgrade, IMHO, is not worth the effort. It runs too hot and bleeds the battery. All the best.

Well, I decided to import the "lost" posts last night. At first, I wasn't going to bother because I thought it was only 300 or less posts, but after I ran an SQL query to compare t…

I see absolutely no signs of a 6 GB hard drive limit. I'm using a 40 GB hard drive (Apple ROMed) in mine. Click to expand... There is a 4GB limit for SCSI Disk Mode...if you ha…

Try here: http://www.ppcmla.com/downloads/VPower_Vimage_PB.img.sea I stuffed up my installer disk image. I haven't tested the .sea file, but if everything worked as it should (D…

Sorry, should have stated the G3 upgrade. Good to know though that it will work regardless while I hunt down online drivers. This shall be my next project.

The driver is required to activate the L2 cache. Otherwise, the CPU module will work fine. A G3 without cache is virtually the same thing as a 603e. I have that same processor u…

Driver for the hard drive or the G3 upgrade? I see absolutely no signs of a 6 GB hard drive limit. I'm using a 40 GB hard drive (Apple ROMed) in mine. As for the G3 upgrade, I've…

I am looking to install a 10GB HD in my 1400 with a 233 Vimage G3 upgrade installed. I have the driver on floppy but alas no floppy drive for the 1400. If I install the new drive…

Nice. But what we really need is a USENET gateway to 68kmla.org.

I spent quite a bit of time last night and this morning improving the Usenet post-indexing system. Before, it wasn't always grouping posts into their correct thread, and instead wa…

well I know the master slave jumpers are ok. the computer worker great for several weeks after the new hd. I reformateded and installed 10.4 clean and then ran tech tools to chec…