If someone would come and pick it up from my door, I would send it off into the world with a ribbon and bow attached. Right now it's taking up useful space. Click to expand... …

Turned out to be leaky caps! Cleaned it up and it works. But I snapped one cap off so I ordered a set of caps to replace 'em all.

In other words, has anybody got a 6500 or a 6500 PSU lying around who could dig one out and post all the voltages and wattage for each for me? I need to adapt an ATX PSU to run the…

Did you try unplugging the floppy drive, the hard drive and the fan to see if it's caused by any of them?

I want to get down to a couple of ms of MIDI jitter. So far I'm at about 5ms with my computer setup. I'm now only recording simple note on/off events to make sure nothing is cloggi…

You will be limited to the number of tracks you can run on a Classic. Performer is the best of the lot in those days. But you will run into the same problem if try to jam too much …

I have an 1040STE with an external hard disk. I wish I could say I use it frequently, but it was sort of an impulse buy. Maybe when I get my music studio set up, I'll dust it off a…

In other words, has anybody got a 6500 or a 6500 PSU lying around who could dig one out and post all the voltages and wattage for each for me? I need to adapt an ATX PSU to run th…

If someone would come and pick it up from my door, I would send it off into the world with a ribbon and bow attached. Right now it's taking up useful space.

If the PRAM battery is good, then yes you have an issue with the motherboard.

Nice work Dennis!

I almost got that ST/ game console thing forget off hand what it was called, when it first came out, but I was shopping for a video game console and ended up with a genesis, other …

I use an ST Mega4 for older software which won't run on my Atari Falcon. Click to expand... Brother Atarian! I have a Falcon 030 but my best ordinary ST is a 1040STF. I'm tryin…

no not fully, yes its toast to joe user, it might be to you, to nerds it might be a interesting project to see what exactly is dead usual suspects, caps, corrosion (and or junk on…

My newest conquested LC 475 displays some strange problems. It refuses to power up, but with different working power supplies (one from my LC III, which works fine, and one from my…

being that large its not going to be anything mission critical (big farads = low frequency filter, or a really half hearted fudge of a timer) I have just been cleaning and sorting …

I have some 1,000uf 25 volt caps here, they were removed from a board, but that board was brand new and never used Click to expand... I'm not exactly sure if it's worth it. Th…

I have some 1,000uf 25 volt caps here, they were removed from a board, but that board was brand new and never used

Wow... If I were to count, I have less than twenty, most doing something useful. I'm still trying to find a useful place to host two m68k Macs - one is a Quadra 610 for which I nee…

Macs and PC's added together I probably have about 50 but most of the PC's are for future parts salvage. There's only a few that I intend to keep intact like my Dell GX 1's. I'm re…

I received the board and other goodies. Here is what happened since then: A. Checked for a short from +12 to GND or any other rail. I found some suspiciously low resistances. …

76 I believe is accurate. It's easy to lose track. The link to my machine list in the 68kmla wiki is in my sig. The machines I have setup, 6 for me and 2 for my wife, are all se…

76 I believe is accurate. It's easy to lose track. The link to my machine list in the 68kmla wiki is in my sig. The machines I have setup, 6 for me and 2 for my wife, are all s…

Damn! Seventy six computers? You and I are at opposite ends of the spectrum, I believe. I have what I thought was a decent amount of machines, but I try to get them to justify the…

Because MIDI latency and jitter on modern computers is a problem. I've been contemplating in either get a dedicated hardware MIDI sequencer or an old Mac for MIDI sequencing, so I …