Does anyone have the pinout for the internal keyboard connector on the PB1400? The one that I had declared "dead" works just fine hooked up to external monitor and kb/mouse with th…

Does anyone have the pinout for the internal keyboard connector on the PB1400? The one that I had declared "dead" works just fine hooked up to external monitor and kb/mouse with t…

I recently purchased two parts Pismos 400s that I have combined into one. I am not sure what I am going to do with it now that it is done (eBay, maybe), but I have a question about…

Good advice always, Bunsen, thanks. I'll post a progress report when the patient is off the table...

That's certainly a cheap fix. Be patient with the teardown, and keep track of your screws. BTW, in case it wasn't clear from LC_Guy's reply above, the "Kanga" G3 Powerbook logic …

If you want to make a trip down to Deptford I have a B&W board with a 400mhz chip you can have for free. I have a power supply too if you want it.

Thanks for everyone's comments. I think I'm ready to pull the switch on this! I will check and see if they have the 240mhz board; but for $20 + ship, the 200 may be the most cost-e…

[] ]'> [] ]'> [] ]'>

Thanks for all the info. Going to spend next weekend maxing out my Radius 81.

Good point, I had already tried it in the beige, though. It didn't seem break anything. I can't think of anything I did to mess up the B&W when installing the G4. When I w…

Ah yes, I forgot about the 240MHz model.

Haha, looks like I've been beat. Oh well, this thing is still quite a quirky toy. I've got a spare 80GB HDD and I figure, if I can ever find a cable for the external CD, I'll loa…

The other one I want is an early HP OmniBook 300. The early ones were fun, they had a 'pop-out mouse-on-a-stick' (the mouse was permanently attached via a moveable rod, it would s…

Or better yet, track down a board from a 3400/240, the fastest stock pre-G3 PowerBook ever. (or just track down a Kanga board)

While you have it apart, why not shoot for 225MHz? That would make it the fastest non-G3/G4 Powerbook ever

That Epson is win. Welcome to the retro netbook club

The very early sawtooth used the same psu as the B&W. Most sawtooths had two more pins on the connector.

The Gateway probably wins, hands-down, for combination of oldest and "netbook"; although it wasn't really possible to use it as a "netbook" when it was new. The roughly same age, …

Anybody ever try putting a Sawtooth motherboard in a B&W case? Since it looks like the motherboard in my B&W is dead, I'm thinking it would make more sense just to…

I suppose it's just speaking the obvious to point out it'd probably be a bad idea to put that G4 module into your beige machine, unless you're willing to take the risk that it'll m…

congrats, it sounds like its a cool conquest, and a ton of fun, but... your going to have to go back abit further for "netbooks" http://commons.wikimedia.org/wiki/File:Libret…

I was at SalVal today, and found a small leather bag which contained a fully functional AST 280M notebook. Specs: Cyrix (Ha! Remember them?) 200GXM CPU 32 MB RAM 8" 640x480 col…

At this point, I'm at a bit of a loss about what to do. My two choices seem to be either to try and grab a cheap releacement motherboard (preferably a rev2 to replace the current r…

I can't see why not - it was never an official upgrade, but all the other parts should be the same.

Well I think I just found the answer, it is definitely due to size. These things are absolute barrels for the capacitance that we need. http://www.parts-express.com/wizards/searc…