At ThinkGeek they used to have a Static Electricity discharger I always use for computers and the like... And how about Static Spray?

I'd recommend switching out analog boards before you try to use it again. Try to find a working SE/30 analog board to use while you deal with the one in the machine now. And, if …

There's also the Nubus Mafia at Applefritter.

Nope, if you can boot and get the machine to start recognizing the adb keyboard for the option key, it does just that. Puts up a rotation of screens and tells you the resolution a…

I assume that only works if you have the Radius drivers installed. You may find more information on your card here: http://www.lowendmac.com/video/ Click to expand... That was my…

I've seen floppy drive cleaning kits kicking around the dollar stores, still. They seem to consist of a normal 3.5" floppy casing with a "disk" made out of fabric, and a small tub…

Go out and find a nice Sony Trinitron, they all seem to SOG just fine.

I assume that only works if you have the Radius drivers installed. You may find more information on your card here: http://www.lowendmac.com/video/

H3nry, thanks for trying to help. The monitor has no apparent way to accept sync on green. I've navigated the On-Screen-Display menu and explored every possible setting, but most …

This is a problem located on the logic board. Click to expand... After further thought, there is also a slight possibility that the problem does lie in the shell or dirty logic…

Woah, that's nasty! That should not be happening!

Ahh the IIGS.. My favorite machine of all time!!! If you are looking for a LOT of what was available for this machine please visit the "What is the Apple IIGS" website. it's loc…

Ok So my screen has those diagonal lines and I notice that the screen has like a lot of static electricity in it. I had my hand on screen and turned it on and it zapped the %#$&amp…

However, i noticed when you turn the power on to the unit, it bongs and starts right up. even if you shut down, it will turn off then back on and start up. without pressing the pow…

ProDOS is the name of the file system, just like Macs use HFS. GS/OS is the operating system which does the windows, toolbox, program launching, etc. Click to expand... Gotcha.…

I've tried three floppy drives. 2 are from LCs, 1 from a IIci. They all do the same thing even with different cables. I do have my broken motherboard. Is there a way I can ident…

The IIgs can do Appletalk with a mac using the serial port, you just need a version of GS/OS installed with the correct driver. There are also HFS drivers for GS/OS 6 that let you …

COOL! I think I have a Spectrum in my pile o' curiosities, so that's good to know.

Here's a bit of information I just found: Q: When I connect my display to my Spectrum card, instead of getting a usable picture, I get a distorted, scrambled image. I know the mon…

It could just be a bad card or the card was loose. I know the monitor works though. I'll try again tomorrow. Tempest

The green tinge is probably because the quadra is putting out sync on green, and the monitor isn't expecting that. The added sync signal boosts the zero (black) level on the green …

A Spectrum 8 and a Multi-Scan monitor ought to work together. Get one of those 15-pin to 15-pin adapters and set it to emulate the basic Apple 13" RGB display to start with. Actual…

The IIgs can do Appletalk with a mac using the serial port, you just need a version of GS/OS installed with the correct driver. There are also HFS drivers for GS/OS 6 that let you …

What you need is a "Mac Liberty Adapter", or its equivalent, They plug into any DB-15 Apple Video Port and have either an HD-15 SVGA Connector or another DB-15 Apple Video Port on …

Folks, I'm coming back to the barracks after a long hiatus, in the hope that someone can point me towards a solution. The problem: I wanted to put a newish CRT monitor to good use…