Off-hand, an immediate suggestion is to take in Franklinstein's comment about Royal VRMs in the Beige DT and MT (in your other recent post, about ZIF CPUs). Beyond that, some test…
It's been a long, long drought since ic-china had much in the way of 500MHz ZIF cards, and even now it is only the 750s rather than 7400s. Grab while the skips/dumpsters of the wo…
That's an awesome tip - thanks!
That being said, I'm about to put down $21 for this item:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230304040895
...and I though…
Hi guys,
As some of you will already know, I'm currently having fun restoring a thrift-store-salvaged Beige G3 Tower - I've successfully upgraded the RAM, created an Admin account…
Hi.
Just thought I'd draw your attention to a pile of Newton developer's tools that are being offloaded in Melbourne, Australia. With our dollar currently around 60 cents US, pri…
68kMLADevelopmentby BunsenWed, 29 Oct 2008 - 15:44
www.buy.com has the wang model of 6200, that is where i bought mine from
buy.com xfx 6200 wang
that is where i bought mine from.
as heavymetal4god said it could be bad nvram set…
68kMLAHardwareby madmax_2069Tue, 28 Oct 2008 - 06:28
Would be nice to run OS/X - sadly 64mb of ram won't be a pleasant experience :'( or maybe it won't install.
Got it running with the 40GB drive - its running very nicely on OS …
Oops! The disk image for King's Quest disk 1 came back with errors & ADTPRO labels the disk as being "I/O Errors." I have a utility that will try to get bad blocks out on m…
68kMLAHardwareby magnusfalkirkMon, 27 Oct 2008 - 23:33
On the tray loaders the two limitations are that the OS has to be on the first partition which is 8gb or less, the second is the mac can't recognize the full capacity of a HD if it…
It should boot ok as blixanz says, the OS needs to be on the first partition of the drive which must be under 8GB or your system will become very ubnstable.
Try installing the dri…
Have one of my tray-load iMacs going now and have put a 40GB drive in to replace its' old 4GB. Drive has not been partitioned.
Can't exactly boot into Mac OS :-/ - just hangs a…
I know what you mean about grasping at straws.... I've tried a few already.. pram, nvram, cleaned everything using Onyx. I hope its not a duff card as these are hard to find....…
It should work fine. Did the G4 start reliably before you put in the 6200?
Also, apparently this card shouldn't be taped so make sure there is no tape on the gold connectors. It…
Hey folks, if I can bring up this topic again...
I have a G4 450 "Sawtooth" I have flashed a 6200 wang video card and it will not always boot. Some times the system boots with …
How long is a piece of string?
As with any saleable item that can be imagined, your card is worth only as much as someone else is willing to pay for it. You may be able to glean…
I cleared the G4 DA by removing its drives (three of them) to a G4 MDD, where they work properly and without any grizzles or KPs. The one unfortunate response was OS 9.2.2's inabi…
I'm not sure if OS X sort of ear-marks certain kexts during install for potentially faster loading or something. Dunno.
If you're using an SDR RAM eMac, then the architectures sho…
68kMLAHardwareby FranklinsteinSat, 18 Oct 2008 - 23:08
Try installing Tiger and then use Migration Assitant to transfer the files. The install still thinks your on the eMac witch can cause problems in the innards of OS X. I usually get…
68kMLAHardwareby ChristopherSat, 18 Oct 2008 - 21:03
A while back I was attempting to clean up a newly-bought 'not working' iBook G3/600 in target disk mode from an eMac. It was a successful exercise, but the next night, when Retros…