If these SIMMs are all identical, then at least 1 of the 4 is dirty or bad. Check to see if the numbers on the actual chips match from SIMM to SIMM. If they're different at all, …

Bought a Flower Power iMac G3 that turned out to have a G4 upgrade inside. It started out as a Snow G3 400 but over time has had many parts added/swapped out including the casing …

Yes I found it. When I put the 'bad' set of RAM in I get a normal chime but then nothing happens (the OS never loads). When I stick a good set in the other bank I get the chimes …

and the other 4 appear to be bad (the Mac won't boot with them in), but I assume they're also 1MB sticks. Click to expand... If the RAM is bad, the Mac should make a death chim…

What is the voltage supposed to be? I am reading 3.06v and 3.04v.

Well I finally got the IIfx working. Turns out both of my SuperDrives are bad (not sure if they're fixable) but I had a spare working HD so I was able to get it to boot into Syste…

System 7 seemed somehow "tuned" to run really well on the IIci. Click to expand... Yep, it is the first Mac with the new universal ROM that has 32-bit QuickDraw, Gestalt, and m…

I booted your IIfx from an external hard drive without a terminator at all Tempest. I think it depends a little on your drive too. Terminators are tricky and unpredictable as to …

I just vacuumed the psu fan without even opening it and the case fan while I was at it, and the G4 is now quieter than it has ever been!

sounds like the fan, so yea try blowing it out, and worst case you can replace the fan fairly easily

Today, my Mystic G4's power supply started making an out-of-the-ordinary noise instead of the typical. With the unusual noise, the case slightly vibrates as well. I could tell it w…

This site seems to be selling a new battery with a case and contacts compatible with the Macintosh Portable. Click to expand... Upon further investigation, that company wants y…

Can you give some links of the 6v lead acid battery I should buy and exact specs?I understand nothing regarding electonics and electricity! Click to expand... I've come up with…

I love my Ataris, but they have been put away for most of the past year while I have been slowly moving my music setup around. I've got a box of Dr. T's software which is all amazi…

Regarding the dead PMG4: The reason it isn't responding, powering up or waking from sleep is due to the Power Management Unit getting a bit screwed up. To fix the problem, I woul…

Can you give some links of the 6v lead acid battery I should buy and exact specs?I understand nothing regarding electonics and electricity! Click to expand... I'm looking to ad…

if I look off the network settings for the G5 Tower that auto-connects, is there a way i could manually enter that info in on the G4 MDD? Click to expand... If I recall, in aut…

Yeah, I wouldn't doubt. I think that was the initial reason it was disconnected in the first place, I guess I just "happened" to revive it for a few months. And I've had an AWEFUL …

The power supplies on that model are known to fail, so that may be what died. As for ethernet, sometimes the computer won't autonegotiate a suitable connection with the central hub…

yea it should not be hard to add the termination, but resistors alone do nothing for noise, you need a rc network by the time you figure out what noise is present and do the math …

I haven't looked at the specs, but it's probably not a big deal to change out the internal terminator packs with the "proper value" of resistor to create an on-board Black Terminat…

Do you use two (3.1V) or three (4.65V) to replace a 3.6V PRAM battery? Or are you referring to replacing the 4.5V square PRAM batteries as pictured above?

Yes I desperately need one for my IIfx. I'll send you a PM. Tempest

Gottcha. Well I went to work on it today (finally), and the machine is dead. I always kept the computer in sleep mode while I was logged in and the computer was locked, and apparen…

Tempest, Would you be looking for a black terminator? A couple of days ago, I found my old one (got rid of the IIfx some time ago). John