long live Robby the Robot!
arrr my hard drive wont boot :scrambled: if i remove the hdd and put it in my classic II (b/w) it boots fine....
the 575 is not here yet.. so i'm…
I'm sorry, I think my continuity tester was on the fritz. I switched to a different one that has an audible indicator and I found much more connections. All data and address bits…
68kMLAHardwareby Dennis NedrySat, 6 Feb 2010 - 00:11
All of the data bits of the onboard ROMs are indeed directly connected to the ROM SIMM slot. Also to RAM bank B. RAM bank A is also connected, but via 3-state bidirectional buffe…
to bad, they make great computers, i have one
Click to expand...
How loud are they? I've been curious.
Click to expand...
They are almost as loud a MDD, which got the nickn…
That's great -- you're going to love that upgraded CC. You'll be able to watch Cinepak-encoded video at quite-respectable framerates. I used to have a 575 playing "Forbidden Planet…
I've played with this a bit, but it appears that the onboard ROM address/data pins are not directly connected to those pins in the ROM SIMM slot.
Click to expand...
WRONG
All …
68kMLAHardwareby Dennis NedryFri, 5 Feb 2010 - 02:50
Dennis, I think you mentioned in another thread that your IIci is working well now except that you still must have a ROM SIMM installed for it to boot.
If you are up for some tediu…
68kMLAHardwareby Dennis NedryThu, 4 Feb 2010 - 21:38
Heck, I had to ask! But it does sound like the SCSI-IDE-FLASH would come closer to reality. That would be an interesting setup...the main question would be if you could boot from…
Heck, I had to ask! But it does sound like the SCSI-IDE-FLASH would come closer to reality. That would be an interesting setup...the main question would be if you could boot from…
You can turn off the memory check btw if you got the apple 601 card in a quadra. Involved some cmd + alt +ctrl + shift action when opening the CPU toggle control panel. Can´t remem…
Dennis, I think you mentioned in another thread that your IIci is working well now except that you still must have a ROM SIMM installed for it to boot.
If you are up for some tedi…
Its practically one of those "Holy Grail" ideas....it'd be wonderful if such a device existed, and it'd no doubt be extremely popular if such a device existed, unfortunately it doe…
Its practically one of those "Holy Grail" ideas....it'd be wonderful if such a device existed, and it'd no doubt be extremely popular if such a device existed, unfortunately it doe…
Hello all,
I had a question that just popped into my mind. I had seen an adapter that changes USB to SCSI and since the hard drives that are in the old 68k Macs are SCSI drives, …
Success!!!
Cleaning up all of the flux after all of the soldering took the longest. The soldering itself was not too bad. There were one or two pads that had corroded a bit …
FYI, I also have two working 150s, one with the display bezel in bad condition, but otherwise fine; the other in good to very good condition. I still have one power supply too. Be …
68kMLAHardwareby J English SmithWed, 3 Feb 2010 - 22:29