I had a double take on the title. Burn!

Installed version 4 but the LC520 ( OS 7.6.1 ) does down when Toast 4 is launched. Is there a Toast 3 or 2 somewhere ?

HAHAH At the screen! That is soooo cool! It looks like confetti.

Well, my Portable is back to its old tricks: Power on, chime, die. Doesn't matter what I unplug from the logic board, I can't even get it to do what it did yesterday (power up, sp…

The Classic II will also run (a special version of) System 6, under which it runs very fast indeed. Click to expand... That's 6.0.8L, correct? Where does one find this version?…

and can pick up even more power if you spring for an external floppy drive (usually less than $20 on eBay) Click to expand... On the other hand, so is an extra SCSI hard drive

I'd put the hard drive inside the LCIII+ since you're more likely to run programs that require system additions such as QuickTime on it. Additionally, if you don't have the System …

HAHAHAHAH ThanksPsssst The link to my wiki is not that necessary but if you really want to put it it's : http://68kmla.org/wiki/User:Mars478 Click to expand... Ok, I've fix…

Should work just fine. Just make sure you use Toast 4 or earlier, as it's the last one that works with a 68k processor. But, to answer your implied subject-line question: No, you…

My LC520 has external scsi and running OS 7.6.1. ( At one time i had an external hard drive via scsi but that external drive and it's replacement had a horrible death. RIP dear dr…

My LC520 has external scsi and running OS 7.6.1. ( At one time i had an external hard drive via scsi but that external drive and it's replacement had a horrible death. RIP dear d…

Update: After storing it with both batteries removed for a couple days, I have gotten a little further: So before, when I had all power unplugged for a few minutes, it would start…

I'd put in in your Classic II, which is the most limited of the two machines, true, but also the one with what most people would say has the most character. The Classic II will als…

Sorry, I missed the Kanga part somehow and had it in my head that it was a 3400c. Still, for $12 you can't go far wrong. Click to expand... For almost all intents and purposes …

Sorry, I missed the Kanga part somehow and had it in my head that it was a 3400c. Still, for $12 you can't go far wrong.

It's been left plugged in for several days and exhibits the same behavior (and consistently loses date/time settings, which is pretty much a guaranteed sign of PRAM battery failure…

Erratic and observable power-related behaviour is characteristic of backup battery failure in nearly every single iteration of the PowerBooks, though the early ones (1xx series) se…

I can't believe I missed this; was there a lot of boxed software this time? How was attendance? I would have been all over that AT setup.

All this was given to me. Pristine condition Centris 650 with pristine Apple Display. Literally this setup looks and works brand new. Pristine-looking Personal LaserWriter - but …

One more problem...the battery holds a good charge, but the machine won't boot from it after sitting unplugged for a half hour. However it will boot from the battery if I unplug th…

I've got a Kanga G3 Powerbook which I picked up recently for essentially nothing. It's running 9.1 and its RAM is maxed out. The battery even holds a 2+ hour charge. I've got it co…

{ "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The requested content cannot be loaded. Please try again l…

Do you reset the power manager after plugging the Portable in (press the interrupt and reset buttons together)? After it's had all power removed, my backlit Portable always requir…

if the main battery is so shot its shorted out you could be driving the supply into protection mode, same thing happens with my 386 laptop, with the battery in it will try to fire,…

I have started the upgrade, almost finished but ran into a snag. The one thing I have not tried is installing a PDS terminator in the G3 card. The directions say nothing about t…