noidentity, I was able to download the driver today. It is working great on my TT128 at 1680x1050. Thanks again, Mike

Did the 1.42s come as FW400? I've only seen the 1.25s as FW400, though I imagine you could just get the 1.42 out of one of the FW800s and bolt it in. Click to expand... In my c…

My setup works fine on that B&W, I have a Radeon video card in the 66mhz PCI slot (the model with the fan before they started naming them 7000 and took out T&L). I …

home.ripway.com is timing out when I try to download the driver. I will try again tomorrow. Thanks, Mike

ps/2 mouse to 128 mac is dead easy with a mcu (I recently did it for my //C but the pinouts are abit different ) basically there's 2 signals per axis, it works like a normal rotary…

I saw some posts here recently about such hacks, dunno where, but I think KBD translation was included. You might want to contact Silicon Valley Bus Company, they had a product ca…

Anyone seen one of these yet? being able to use a ball or optical PS/2 mouse on an original macintosh 128/512/plus without using the original mouse. I am making such an adapter an…

1) External drive must supply termination power (the power supply in the Plus is too feeble to do the job, so the design team decided that the external box should supply term power…

OK, here is the promised story: I purchased my first Mac, a IIci in November 1990. I had been using IBM PCs (XTs and ATs) for the 5 years prior that I spent as a student at The O…

Bunsen...Have you taken your pills? Click to expand... No, I ran out. Can I have some of yours? Click to expand... Sure you need some vicodin?

It should say on the fan I would expect it to be 12V dc thanx for the comments michael

It can be replaced, but you will have to open the power supply to do it, obiously you should have it unplugged, but there's some hefty filter capacitors on the AC side that can pac…

The fan on my quicksilver 2002 power supply is making a lot of noise ie all most dead. can it be replaced or is another ps in order? thanx

Running it through an empty dishwasher with no soap and clean water makes a fabulous job of it, as it happens, but most likely the same magic could be worked by sticking the thing …

Gotcha,thanks. Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasi…

Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasis. Because the 575 motherboar…

Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasis. Because the 575 motherboar…

6500 board in a 5200 or 5300 chassis / 3.3v regulator hack Click to expand... I was able to pop a 5500 board into a 6200 Click to expand... Huh. I actually thought …

I'm happy with my B&W G3 with maxed out RAM (1 GB), upgraded 1.1 GHz processor (well, it's advertised as 1 GHz but the setting goes to 11, er, I mean 1.1), and OS 9.2.2. I'…

There is an exception. The hack *MUST* be done for the 5400 board. However, the 5500 board will work *WITHOUT* the hack, but there might be issues with PCI. I'm not sure if this is…

Bunsen is correct - in order to use the 6500 board in a 5200 or 5300 chassis, you must do the 3.3v regulator hack mentioned by johnklos.

The fastest current PPC system I have is only a B&W with a G4-450 CPU upgrade (needed for a Matrox RTMAC setup I have). Click to expand... When current, Matrox stated, …

Is there any all-in-one Macs that a 6500 motherboard will plug into? Click to expand... the 5xxx series AFAIK. Click to expand... Without mods, only the 5400 and 5500 from …

An overclocked 1.42 GHz Mirrored drive door will probably be faster than a 7447a because the Apple processor has 2 megs of L3 cache in addition to 256k of L2 cache as compared with…

Don't see why that should be a problem - The VGA output looks pretty standard, and 67HZ is about as basic and common a sync rate as you can find. But if for any reason it is an is…