Hey guys, yet another question. This one one is about my Lombard. ****LOOK DOWN THE PAGE!! PLEASE! After installing both OS 10.2 and 10.3 (from retail disks), my Lombard would ac…

Im thinking about buying an Apple two but i have some questions first. It would be a IIc+ or a IIe, which would be best for in the UK? From what iv read Apple II's that are PAL d…

I loved my Newton Message Pad 130 and used it everyday, but one day the batteries died. I didn't get around to replacing them for a couple of weeks, but when I did get around to r…

The USB 2.0 card was present during the Mac's month-long existence as a 533MHz machine, with no untoward behaviour evident. But your thought had also crossed my mind as an avenue …

ROM03 machines have less background noise coming from the speaker. It's most noticeable from within GSOS, where the processor and video hardware stay pretty busy.

Out of curiosity, does the mouse issue persist if you remove the 6-port PCI-X USB 2.0 NEC card? Cheers, Rick

Although Macally seems not to allow the name of the iKey4 to cross its lips any more, I found a generalized FAQ page about iKey keyboards. The mouse freeze issue is related …

The SCSI card will be the hard one to find (cheap). You might want a bigger RAM card for a ram drive.

I think I'll go with the ROM 03 for my IIGS setup. I want to get GS/OS running off an HD someday. My ROM 01 has a 1 MB RAM card. I can put that in the ROM 03 and get 2 MB. Then I j…

ROM 3 has 1MB built in. I guess it depends on if you are going to run GS/OS from a HD or just want to play games from floppy. ROM 3 for GS/OS, ROM 1 for floppy based games.

Probably the ROM 3. More onboard memory means that you will have more memory overall. The updated ROM should mean that less of the Toolbox is in RAM too, which is handy. I think…

I have both a ROM 01 and a ROM 03 IIGS. Which one should I use?

well everything was going good with 10.3 till i started installing a security update the computer froze and wouldn't boot back into OS X Another problem started this time around th…

well everything was going good with 10.3 till i started installing a security update the computer froze and wouldn't boot back into OS X Another problem started this time around t…

If you want to use your PCI bus for anything else time critical (like a multi channel sound recorder) I've heard it's not advisable, as it chokes the bus.

but my Beige G3 in OS 9 had stability issues as well but in OS X it ran like a champ with no issues (sept for the monitor going to sleep and not waking up after the 10.2.8 update, …

I had good success with PCIExtreme on my Beige G3 with a Radeon 7000 in it. it actually helped allot more then hurt performance and i had the numbers to back it up as well MacJunky…

Not only does OS X need to be in a partition smaller than 8 GB, it must be the first partition on the drive. And said drive must be set as master, not slave or cable select. It's …

Not only does OS X need to be in a partition smaller than 8 GB, it must be the first partition on the drive. And said drive must be set as master, not slave or cable select. It's…

Turns out that the Network browser crash is a bug not a flaw i got the same freeze from the iMac DV SE so i am guessing that the rest of the crashes were similar bugs in the O…

With extreme difficulty. It's one of those things that gets lumped in with 'MLB failure' as the only remaining (but unspecific) cause of malfunction. When you have eliminated the…

while reinstalling the ram sticks i noticed one of them sounded like crinkling cellophane however that stick appeared to work normally (if you can call it normal) with the computer…

I happily defer to equill's data over hearsay. I've never directly tested the assertions from the LEM profile, so I have no direct experimental data to support or refute it. I've a…

I am puzzled by the references to the <8GB spectre. Ryoohki is writing about OS 9.2.2, having suspended his use of the formerly installed 10.2.5. I'll not deny that the li…

k the beige is reformatted however it just crashed and froze again... this time it was during shutdown the finder "unexpectedly quit" during the shutdown proses and i told it to sh…