I have a PB 3400c with the same issue. The screen generally will not light up but when it does, the screen is all messed, then the unit crashes. The cable and everything in the …

Below is the last few weeks of scores from evilbay. In addition to these, when I went to pick up some of the items from a local seller, I also bought the following: Quadra 700, m…

I'm getting a Hooper (PB 3400c) in a couple of days - decided to try my hand at restoring one, since I've done a lot of work on 5300's. The one I bought (for $2 plus shipping) has …

I enjoyed your lengthy post about the history of/ your history with the machine, which mirrors my own experience (including references to some of the subsequent hardware purchased,…

My understanding is that water was used in the factory for cleaning the boards after assembly, and so that it has to be reasonably safe to use water still. Most likely there will b…

I've decided how I am going to clean the motherboard. I'm going to use Alconox. From their website: (Notice it mentions circuit boards!) http://www.alconox.com/static/section_to…

noidentity, I was able to download the driver today. It is working great on my TT128 at 1680x1050. Thanks again, Mike

Did the 1.42s come as FW400? I've only seen the 1.25s as FW400, though I imagine you could just get the 1.42 out of one of the FW800s and bolt it in. Click to expand... In my c…

My setup works fine on that B&W, I have a Radeon video card in the 66mhz PCI slot (the model with the fan before they started naming them 7000 and took out T&L). I …

home.ripway.com is timing out when I try to download the driver. I will try again tomorrow. Thanks, Mike

OK, here is the promised story: I purchased my first Mac, a IIci in November 1990. I had been using IBM PCs (XTs and ATs) for the 5 years prior that I spent as a student at The O…

Bunsen...Have you taken your pills? Click to expand... No, I ran out. Can I have some of yours? Click to expand... Sure you need some vicodin?

It should say on the fan I would expect it to be 12V dc thanx for the comments michael

It can be replaced, but you will have to open the power supply to do it, obiously you should have it unplugged, but there's some hefty filter capacitors on the AC side that can pac…

The fan on my quicksilver 2002 power supply is making a lot of noise ie all most dead. can it be replaced or is another ps in order? thanx

Running it through an empty dishwasher with no soap and clean water makes a fabulous job of it, as it happens, but most likely the same magic could be worked by sticking the thing …

Gotcha,thanks. Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasi…

Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasis. Because the 575 motherboar…

Interesting discussion thanks for all the info. My main goal though is to find a motherboard other than the 575 board that I can put into the 575 chasis. Because the 575 motherboar…

6500 board in a 5200 or 5300 chassis / 3.3v regulator hack Click to expand... I was able to pop a 5500 board into a 6200 Click to expand... Huh. I actually thought …

I'm happy with my B&W G3 with maxed out RAM (1 GB), upgraded 1.1 GHz processor (well, it's advertised as 1 GHz but the setting goes to 11, er, I mean 1.1), and OS 9.2.2. I'…

There is an exception. The hack *MUST* be done for the 5400 board. However, the 5500 board will work *WITHOUT* the hack, but there might be issues with PCI. I'm not sure if this is…

Bunsen is correct - in order to use the 6500 board in a 5200 or 5300 chassis, you must do the 3.3v regulator hack mentioned by johnklos.

The fastest current PPC system I have is only a B&W with a G4-450 CPU upgrade (needed for a Matrox RTMAC setup I have). Click to expand... When current, Matrox stated, …

Is there any all-in-one Macs that a 6500 motherboard will plug into? Click to expand... the 5xxx series AFAIK. Click to expand... Without mods, only the 5400 and 5500 from …