and get rid of that damn color classic board lol Click to expand... Just my opinion, but I reckon it would be a good idea to keep the original board in case you ever decide to…

It's actually a good idea to wait several more days. There is a good chance that while it may seem dry, it may not actually be really dry.

I finally cleaned my IIci motherboard. I used a large diameter bucket with Alconox detergent mixed with warm water. It really brightened things up. It worked so well actually th…

Would love to see some photos of the 500 if you get a chance. I don't know this model, is it like the form factor of the 520 and 540 ("Blackbird") models? Click to expand... Th…

You've got a PM

Would love to see some photos of the 500 if you get a chance. I don't know this model, is it like the form factor of the 520 and 540 ("Blackbird") models?

This is very good news because I just bought a 128mb 72pin simm module. I bought an entire LC 550 machine today, so I can pull the board out of that when I receive it, put that int…

I'm fairly sure the guts of the 575 and 550 (apart from the logic board of course) are pretty much identical. The displays are the same (which is the most important factor), so it …

I've used a steel ruler to slide into a slot and then firmly push it up to slide up the tab, you need to remove the battery to take the top and bottom half of the casing apart. Ho…

You can find the drivers here on Newertech's legacy support software page: http://www.newertech.com/tech_support/support_legacy.php ... download NuPowr Cache 1.2 and NuPowr Syste…

I've got a dead PB100 that's been sitting in my closet for some time. The battery refuses to budge when I try to move it (the door won't move at all). Any tips for successful remov…

NVM I got an 550 board Now will a 575 board work in a 550? Also does the 575 and 550 use the same type of ram?

Know anyone selling an LC 550 board?

You have done one of the following, I trust: 1. Video hack to allow CC video operation in 640x480, which the replacement logic board demands (which I do not recommend as it effect…

IIRC, for 8.1 you need to install the OS as a "fat binary" system containing both 68k and PPC code. I think you do this by selecting to install "For any Mac"

Going to try System Enabler 065 version 1.0 tomorrow with enabler 403. Hopefully that will work.

Added System Enabler 403 to the System Folder, still nothing when trying to boot off the 7.6.1 CD with 575 board. Got Sad mac face at boot, when I tried to boot off the 8.1 CD . T…

That didn't work either.

I think I'm going to give System Enabler 1.1 a shot and replace the 1.0 enabler with that on the hard drive. Then boot off the 7.6.1 CD with the 575 board installed. I'll give you…

Update: Put barebones System Folder I extracted from 7.6.1 CD-ROM which I then put on a boot disk CD-ROM, booted from disk, copied System Folder to HardDisk with the System Enabler…

I can't get this machine to install the Mac OS with the 575 motherboard. The original motherboard that came with the Color Classic is missing ram and gives me out of memory messag…

Seconded. I use a PowerMac 8500 all the time and its PRAM battery is dead, so I have to set the date each time I power it up (I turn off the outlet strip to it at night). Recently …

I would have thought that it should work straightforwardly under 7.6.1; the ppc upgrade cards reportedly required only 7.5.2 (buggy) or above. There was a NuPower extension that we…

Hello All, I've obtained a Nupower 117MHz Upgrade for my PowerBook 540c but do not have the software to install it! Can anyone help me? W@hat do I need exactly to run System 7.6.1…

There's quite a few people over at cubeowner.com who have installed dual 1GHz CPUs and up. Course, for any CPU upgrade a fan is recommended.