...and i just measured and my lciii's is 1''x~4''x~6''

oh, and why wont #2 fit? its a 1/3 hight and the lc3 can take up to 1/2 hight, right?

#1 won't work, because I think you can't run an Ultra-320 drive on the LC's PSU. (power constraints, etc.) #2 is too big to fit. Click to expand... Whats the bigest that'll fit…

#1 won't work, because I think you can't run an Ultra-320 drive on the LC's PSU. (power constraints, etc.) #2 is too big to fit.

Would this one work w/ a 68-50 adaptor? NEW Seagate 73GB Hard Drive - ST373207LW SCSI Ultra320 - 320 Mbps - 10,000 RPM Seagate Model / Part # ST373207LW Capacity: 73GB Rotatio…

The power supply in the LC III might be too tiny to support such a high-capacity drive. Click to expand... I've been running a 9.1 GB 50-pin SCSI Seagate in my LC 475 for quite…

The power supply in the LC III might be too tiny to support such a high-capacity drive. And that threw me off when you deleted your post.

Ah jt, good to see you getting back to your old mischief :b&w: I'll be watching with interest, but you knew that Click to expand... HeHeHeHe!!!!!!!!!!!!!!! :lol: CO…

Mac OS 9.x will run on a 6100, but is tricky to install. You need a retail install CD (ie a full generic install disk, not a model specific disk) and to boot from the CD. You can't…

The 6100 supports up to 9.1, but you must install it from a 9.1 disc. You cannot boot a 6100 from a 9.0 install disc (even a retail one), so you can't install 9.0 or update to 9.1 …

That lot of two Hawks is a good deal. Click to expand... Yesterday I've got Hawk for the bottle of beer it was better deal...

Mac OS 9.x will run on a 6100, but is tricky to install. You need a retail install CD (ie a full generic install disk, not a model specific disk) and to boot from the CD. You can't…

You'd be much better off running OS 8 or even 9 on it. (assuming you have the RAM for the latter) Click to expand... The 6100 tops out at 8.6.

Just to clarify one point of confusion in this thread: (quotes to follow) I found this article on Apple web site: http://support.apple.com/kb/TA28860 Am I OK to assume tha…

It would depend on the system software in particular, and possibly the monitor also. There is occasionally a need for considerable fiddling over this, for some reason, so if you do…

maybe because I have not thought about it before? Is there a problem here? anyway my initial question was about the maximum capacity HD of the 6100, not about formating. In anycas…

Maybe a refresh rate needs changed?

It's something that happens IIRC, so don't panic just yet I think there is a simple solution... Can't remember the solution off the top of my head...

Video cable is plugged into the connector on the motherboard...

I got a powerbook G3 lombard here, and its dead as dead can be dead..... Here was the issue. some kind of liquid was spilled in it, and immidiately he pulled the power and battery…

Are you using a video card?

Trying to get said machine on line, and the one problem is that the video image on the monitor is offset to the right by about an inch and a half. I know it's not the monitor, beca…

Ah jt, good to see you getting back to your old mischief :b&w: I'll be watching with interest, but you knew that

Never actually seen a lime or tangerine iMac in real life... oddly enough those would be my first choice after graphite. Click to expand... Wow, my very first Mac was a Lime 26…

The G3 card works *sometimes* in the 7300. I have a 604e in it right now, and you have to press the power button, wait a few second, toggle the power again, before it will show vid…