I have tried all of that, the OEM one is set to cable selct, i tried that, i tried as a master and master single, master with legacy support, master with 15 heads instead of 16 (th…

Hi sp00nix, sounds to me like you've not set the correct master/slave jumper on the hard disk; this must be set otherwise the drive won't detect properly and screw with whatever e…

Hello again. This time i am trying to install a bigger HDD in my G4 tower. It came with a 10gb drive. I cannot get 10.4 to install on there with any other HDD other then the one i…

well that didn't work lol. It wasn't even recognized as being in a PCI slot

If i get a chance i will try after work and post my findings. I have a whole lot of different cards, some simple scsi, some RAID with 128MB ram, daughter cards, batteries, and heat…

As far as I know, no promise cards can be made bootable. Adaptec cards have a slight-chance of being made bootable. One of the main issues with flashing from PC to mac is the size…

Hmmm, the have ROM and RAM but i don't know if the MAC would read it right. They are Adaptec and Promise raid cards, maybe a re-flashing? I will have to play with it.

They may. But I don't think the G4 would boot from them. scratch that, I doubt it would. Mainly as there has to be a ROM on it. Howerver, since I had an Adaptec with a PC ROM on…

Hello everyone, I have a ton of SCSI 160 and 320 cards and HDDs from dell servers. Would the cards work in my G4 tower? If so OS 9.2 work or would i need OS X? I don't know how p…

... or at least have a spare or borked MiniDock you don't mind hackrificing. Say, jt, if you can find one for sale somewhere and you want to give this project a kick along, I'll t…

CF cards as HDs. I've been reading about wear-leveling and the speculation by some that with daily use the card would be toast after a few months. Click to expand... This is th…

I had thought about putting a CF card in the PCMCIA slot (on my 3400) and using that as a VM module so to speak. Click to expand... Yeah, not a great idea, because PCMCIA is qu…

Thanks for the information, fmwolf. I'm happy to see that a 190 can handle the MLA. I'm glad hear that your CF card has lasted this long. With frequent backups, this hard drive alt…

I've been using my 190 (posting from it) with an ultra II CF for about 3 years now - not on daily basis but frequently enough and with enabled VM. Battery lasts more than 2 hours (…

Paging Trash80toG4 ... where is that guy?? Click to expand... My alternative idea was trying to pin-map the docking bar to a PDS of some sort and mounting it inside a MiniDock.…

I've got another question, this time about CF cards as HDs. I've been reading about wear-leveling and the speculation by some that with daily use the card would be toast after a fe…

Excellent. Thanks for the information, beachycove. It looks like I'll have a fun project next weekend.

... how did you install the OS onto the CF card in your 2300c? I am away from its DuoDock II and have no external CD drive, so I was thinking I would put it into a PCMCIA adapter a…

Thank you all for your replies. Part of my challenge for the 3400 is to keep the drive small since I like System 7 and it doesn't like large drives (unless they're partitioned), bu…

IIRC, that was a problem with specific drives in the 30-40 GB (that size only because that was current in '03/'04) range for the 2400c, 3400c, Kanga, and Wallstreets. OWC had a pa…

I certainly could not get an ATA-6 drive to work in a 2400c recently, and had to downgrade to an older drive that I had to do some hunting to find (as it needed to be quiet). The 2…

I know these Duos are IDE and SCSI- would that cause an issue for this mod? Click to expand... In it's stock config, the 2300c uses an IDE hard disk - I've put a 10GB in mine. …

The 3400 should theoretically be able to use any HDD under 120GB. It should even be able to use HDDs over 120GB, just that it'll only recognise the first 128GB.

I come bearing hard drive questions. I need to put a new HD in my 3400c, but I recall hearing once that some ATA-6 drives don't work with that series, does anyone have more data on…

Hi, I will leave you a PM just a bit easier that way. Since I do not always log in here. Take Care