Skip to main content
Search titles, bodies, and author names
Found 6,314 posts across 1 forum.

2400c Issues! — #2

This thread gives details of the cells needed to replace your backup battery. They are common and cheap, I found that the soldering was not especially difficult, and the replacemen…
68kMLA Hardware by beachycove Wed, 25 Mar 2009 - 19:14

Ok get this *scratches head*... — #1

I have a solo 867Mhz 2001 Quicksilver (2001 with an 867Mhz CPU) with the following specs below: 867Mhz 7450 PPC G4 1.5GB PC-133 RAM (all apple certified, known working in a sawto…
68kMLA Hardware by coius Wed, 25 Mar 2009 - 18:52

2400c Issues! — #1

For owners of 2400c's, I've been having an issue with my 2400c. I had GLOD but I figured out how to get out of it, which works for my 2400c. Now, whenever I shut down, and leave f…
68kMLA Hardware by Redjack Tue, 24 Mar 2009 - 17:32

Apple IIe memory chips — #1

I am posting in this forum to see if anyone here with an non working apple iie or parts would happen to have a few extra memory chips, aka 16 pin dip memory chips from one of their…
68kMLA Hardware by drbalint Tue, 24 Mar 2009 - 17:30

Resurrecting My Wallstreet — #21

well, to get it working in OS9, I downloaded and installed the latest software for airport for 9, version 2.0.4. The earlier versions don't work with the wavelan cards, but this on…
68kMLA Hardware by iamdigitalman Mon, 23 Mar 2009 - 00:41

Resurrecting My Wallstreet — #20

I have the wavelan silver and it never shows up as an airport card in OS9 or OSX. For OS9 I used the official drivers I found on the internet and they work find. For OSX I used: …
68kMLA Hardware by Strimkind Sun, 22 Mar 2009 - 16:09

Resurrecting My Wallstreet — #19

Ok, I found my images, burned them, and now I remember why I stopped using it on the WS. Even with the 10.2.8 update, every time it reboots, the backlight is off. I have to press …
68kMLA Hardware by iamdigitalman Sun, 22 Mar 2009 - 05:11

How to test power supply — #1

hello i've found some old apple II parts with 3 power supply inside cases and 2 others one "alone" should i test them with the ATX pc way, putting a cable between green and black…
68kMLA Hardware by motion Sat, 21 Mar 2009 - 12:48

Resurrecting My Wallstreet — #18

I have been in and out of my wallstreets (5 of them) so much I can probably do it in 30 minutes or less. Easier to get into then other laptops that is for sure, then again they ar…
68kMLA Hardware by Unknown_K Sat, 21 Mar 2009 - 00:02

Resurrecting My Wallstreet — #17

Well, I did not really care about the casing on the donor book. I was gonna scrap it anyways, since the thing is held together with scotch tape in places 8-o Part of the trackpa…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 22:05

Resurrecting My Wallstreet — #16

OS X does support SCSI. I am unsure about the serial port and I know the DVD decoder does not work (I tried). Good job at stripping all those parts in 2 hours I must say. Would …
68kMLA Hardware by Strimkind Fri, 20 Mar 2009 - 14:34

Resurrecting My Wallstreet — #15

Alright, I got it all assembled. It's booted to my OS 9 disc, writing zeros on the 10gb drive, should take a while. I might burn OS X Jag again, since my copy is messed up. Only t…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 12:43

Resurrecting My Wallstreet — #14

IT'S ALIVE!!! I did some tweaking, and it turns out the motherboard in my main WS is shot somehow. I put the sonnet in the donor, and it boots!! So, my next goal is to swap ALL th…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 10:38

Resurrecting My Wallstreet — #13

Well, there is a firmware update for the processor card it's self, as well as a driver for it. I think I need to install the driver first, and I wonder if the firmware can be insta…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 03:51

Resurrecting My Wallstreet — #12

Wallstreets cannot get firmware updates do they? I would email their tech support and ask them what is wrong, and if they cannot get it working send the thing back (if there is a w…
68kMLA Hardware by Unknown_K Fri, 20 Mar 2009 - 03:28

Resurrecting My Wallstreet — #11

Try running an external monitor, internal video might be dead. Click to expand... I did that/ That was actually the first thing I tried, before a PMU and PRAM reset. I hooked i…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 02:36

Resurrecting My Wallstreet — #9

Actually, macdan has a solution that does not involve finding the same hinges (all three displays use different hinges, but the same clutch). All you need to do is pop off the clut…
68kMLA Hardware by iamdigitalman Thu, 19 Mar 2009 - 22:55

Resurrecting My Wallstreet — #8

On side note, is it worth taking apart a 233 no L2 fully working and installing a 266 in unknown shape? I was given a wallstreet 14" that has bad hinges and has been stripped of …
68kMLA Hardware by Unknown_K Thu, 19 Mar 2009 - 21:00

Resurrecting My Wallstreet — #7

On side note, is it worth taking apart a 233 no L2 fully working and installing a 266 in unknown shape? I was given a wallstreet 14" that has bad hinges and has been stripped of …
68kMLA Hardware by Strimkind Thu, 19 Mar 2009 - 20:43

Resurrecting My Wallstreet — #6

Yes, incompatible RAM will give you death chimes (same if you forget to put any RAM in like I did once). Generally PC100 and 133 is labled as such, PC66 generally isn't unless it i…
68kMLA Hardware by Unknown_K Thu, 19 Mar 2009 - 08:53

Resurrecting My Wallstreet — #5

No, I have 2 working motherboard (one in the main machine, and one in the parts donor), so I am set. The other sound/power board in the main machine works perfectly, so I am keepi…
68kMLA Hardware by iamdigitalman Thu, 19 Mar 2009 - 08:46

Resurrecting My Wallstreet — #4

I have some Wallstreet 2 motherboards if need want to buy one. Which sonnet card are you using that does not work? Any chance it needs PC100 RAM and you have PC66? If the machine…
68kMLA Hardware by Unknown_K Thu, 19 Mar 2009 - 08:38

Resurrecting My Wallstreet — #3

yeah, the case on the other one is really beat up, so I might as well swap in the mobo. But the power board on the other one is loose, so I have to hold in the power plug. One new…
68kMLA Hardware by iamdigitalman Thu, 19 Mar 2009 - 06:35

Resurrecting My Wallstreet — #2

I'm no expert but it sounds like something on the logic board is screwy. If it was just the fan, I'd say it was a sensor but its the charging too that does it. Switch it all and …
68kMLA Hardware by Strimkind Thu, 19 Mar 2009 - 06:12
mp.ls