OK, this is getting really frustrating. I pulled out a SCSI CD drive (actually a burner), and I managed to boot off that (even with no terminator). I used my 9.2.2 CD. With all the…

Thats really quite interesting, equill. Yes, i am still using the original transparent Apple power cable with it. I might have to have a look at the plug and check that its in good…

Don't, without deliberate testing, discount the rôle of the Mac's mains cable in all this. I have had a Snow 500 iMac since new. It has now been always-on since about 1983 but fo…

Well you're not going to believe this, but it seems to have come back to life again. I just sat down with it and tried various arrangements of CPU, motherboard and RAM. Eventually …

Hmm, well now this is odd. I tried the direct method once more with the 24x, and it opened just fine, but did not close. I then plugged the molex into the other cable to go to all …

OK, so I double checked the jumper settings. Then I unplugged the IDE cable on the CD-ROM, still nothing. So, I had a hunch, and unplugged the master molex cable, and plugged it di…

Thanks, guys you have given me a lot to think about and check out later on today. Both CD drives are IDE, and nothing is stuck in either one. I managed to use a paperclip to check …

I assume you are trying to push the button on the front of the machine right after power up. (Keyboard eject does not work on the AIO IIRC). If you wait until it thinks it is boo…

Turn it on after unplugging the CD's data cable. If it ejects, then the problem is with the configuration, cable, or motherboard. Make sure the CDROM is set properly. On most beig…

Actually, there is nothing on the hard drive. It is totally blank, a clean slate. I did it that way so I could install a fresh copy of 9 with all the drivers on the machine. Shoul…

What happens if you disconnect the power to the CD drive, and just boot with the hard drive?

nope, that did not do anything. I hunted and pecked for the original module, popped that in, removed the other modules, and booted. Still nothing. It also can not be power, becaus…

Some RAM will clock down to lower speeds, but I have seen some that don't. Has something to do with the CAS latency or something techie like that.. :lol:

aha, I did not check the RAM. I think I put PC100 in it. I thought it automatically would work at PC66. I will pull out everything but the stock stick and try again. If it were bad…

What kind of RAM did you use? The system bus in the G3AIO is 66 mhz. Did you use PC133? It might not be compatible, or maybe one of the DIMMs isn't seated properly, or maybe jus…

yeah, I have one of these beasts. I upgraded the RAM heavily, and put in a large 20gb HD. For the longest time it was booting with no video, but something told me to give it anothe…

Ooooooooo..... That implies you could do the same job on a 2300 - if you can find the clock jumpers

Does anybody know how to set the processor clock on one of these? I have enough spare parts that I'd like to try upgrading the processor to a faster chip, like a 180 or 200MHz mode…

Well you're not going to believe this, but it seems to have come back to life again. I just sat down with it and tried various arrangements of CPU, motherboard and RAM. Eventually …

Yeah...the thing is, the other motherboard doesn't even chime. The motherboard thats in it now chimes, and comes up with an image, like I said, it just doesn't boot. (either it han…

Wait.... You tried switching RAM, CPU, and motherboard, running on an external monitor, yet it still fails? That strikes me as it MUST be something in the power supply. The only…

Sadly the tray loader pre-dates any sort of Apple Hardware Test CDs...IIRC they came in with the Summer 2000 imacs. I've noticed that in the months before it died, its been tak…

Have you run it through an apple diagnostics disk to have it check everything? I know it sounds weird, but a looping ASD has found many a tricky thing for myself. Also, even with …

Well last week I powered up my iMac to discover it had gone deadskies. It'd boot to the Apple logo (Jag 10.2. 8) , and then freeze, and display static. (like a bad digital TV pi…

I've just ordered a Panasonic UJ-841 DVD-RW for the Lombard. $AU55 inc shipping from the UK and with warranty