Skip to main content
Search titles, bodies, and author names
Found 11,163 posts across 1 forum.

How to test power supply — #6

I always use a hard disk -- one that is usable but disposable -- for 12V and 5V testing. It is easy to make a test cable (with tapping points to measure voltages) from salvaged wir…
68kMLA Hardware by Charlieman Sat, 28 Mar 2009 - 16:03

Resurrecting My Wallstreet — #23

Actually, macdan has a solution that does not involve finding the same hinges (all three displays use different hinges, but the same clutch). All you need to do is pop off the clut…
68kMLA Hardware by quinterro Sat, 28 Mar 2009 - 01:10

Resurrecting My Wallstreet — #22

Actually, macdan has a solution that does not involve finding the same hinges (all three displays use different hinges, but the same clutch). All you need to do is pop off the clut…
68kMLA Hardware by quinterro Fri, 27 Mar 2009 - 13:38

Ok get this *scratches head*... — #4

Have you tried taking out all drives except for the optical, and then giving it a go? That way it would force it to boot off the disc, or not at all. Sometimes my b&w G3 wo…
68kMLA Hardware by coius Fri, 27 Mar 2009 - 01:14

How to test power supply — #4

thanks for this info, so i can just plug power supply "alone" and if i heard the noise, that means power supply works ?? i can do it with no risk to damage power supply ?? Click…
68kMLA Hardware by Dog Cow Thu, 26 Mar 2009 - 14:50

How to test power supply — #3

thanks for this info, so i can just plug power supply "alone" and if i heard the noise, that means power supply works ?? i can do it with no risk to damage power supply ?? i want …
68kMLA Hardware by motion Thu, 26 Mar 2009 - 13:05

How to test power supply — #2

The Apple II power-supply is fairly "intelligent". If it detects a no-load situation (that is, nothing is taking the electricity), it will short-circuit itself indefinitely. This w…
68kMLA Hardware by Dog Cow Wed, 25 Mar 2009 - 22:23

Ok get this *scratches head*... — #2

Have you tried taking out all drives except for the optical, and then giving it a go? That way it would force it to boot off the disc, or not at all. Sometimes my b&w G3 w…
68kMLA Hardware by Dog Cow Wed, 25 Mar 2009 - 20:15

2400c Issues! — #2

This thread gives details of the cells needed to replace your backup battery. They are common and cheap, I found that the soldering was not especially difficult, and the replacemen…
68kMLA Hardware by beachycove Wed, 25 Mar 2009 - 19:14

Resurrecting My Wallstreet — #21

well, to get it working in OS9, I downloaded and installed the latest software for airport for 9, version 2.0.4. The earlier versions don't work with the wavelan cards, but this on…
68kMLA Hardware by iamdigitalman Mon, 23 Mar 2009 - 00:41

Resurrecting My Wallstreet — #20

I have the wavelan silver and it never shows up as an airport card in OS9 or OSX. For OS9 I used the official drivers I found on the internet and they work find. For OSX I used: …
68kMLA Hardware by Strimkind Sun, 22 Mar 2009 - 16:09

Resurrecting My Wallstreet — #19

Ok, I found my images, burned them, and now I remember why I stopped using it on the WS. Even with the 10.2.8 update, every time it reboots, the backlight is off. I have to press …
68kMLA Hardware by iamdigitalman Sun, 22 Mar 2009 - 05:11

Resurrecting My Wallstreet — #18

I have been in and out of my wallstreets (5 of them) so much I can probably do it in 30 minutes or less. Easier to get into then other laptops that is for sure, then again they ar…
68kMLA Hardware by Unknown_K Sat, 21 Mar 2009 - 00:02

Resurrecting My Wallstreet — #17

Well, I did not really care about the casing on the donor book. I was gonna scrap it anyways, since the thing is held together with scotch tape in places 8-o Part of the trackpa…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 22:05

Resurrecting My Wallstreet — #16

OS X does support SCSI. I am unsure about the serial port and I know the DVD decoder does not work (I tried). Good job at stripping all those parts in 2 hours I must say. Would …
68kMLA Hardware by Strimkind Fri, 20 Mar 2009 - 14:34

Resurrecting My Wallstreet — #15

Alright, I got it all assembled. It's booted to my OS 9 disc, writing zeros on the 10gb drive, should take a while. I might burn OS X Jag again, since my copy is messed up. Only t…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 12:43

Resurrecting My Wallstreet — #14

IT'S ALIVE!!! I did some tweaking, and it turns out the motherboard in my main WS is shot somehow. I put the sonnet in the donor, and it boots!! So, my next goal is to swap ALL th…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 10:38

Resurrecting My Wallstreet — #13

Well, there is a firmware update for the processor card it's self, as well as a driver for it. I think I need to install the driver first, and I wonder if the firmware can be insta…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 03:51

Resurrecting My Wallstreet — #12

Wallstreets cannot get firmware updates do they? I would email their tech support and ask them what is wrong, and if they cannot get it working send the thing back (if there is a w…
68kMLA Hardware by Unknown_K Fri, 20 Mar 2009 - 03:28

Resurrecting My Wallstreet — #11

Try running an external monitor, internal video might be dead. Click to expand... I did that/ That was actually the first thing I tried, before a PMU and PRAM reset. I hooked i…
68kMLA Hardware by iamdigitalman Fri, 20 Mar 2009 - 02:36

Resurrecting My Wallstreet — #9

Actually, macdan has a solution that does not involve finding the same hinges (all three displays use different hinges, but the same clutch). All you need to do is pop off the clut…
68kMLA Hardware by iamdigitalman Thu, 19 Mar 2009 - 22:55

Resurrecting My Wallstreet — #8

On side note, is it worth taking apart a 233 no L2 fully working and installing a 266 in unknown shape? I was given a wallstreet 14" that has bad hinges and has been stripped of …
68kMLA Hardware by Unknown_K Thu, 19 Mar 2009 - 21:00
mp.ls