Fan control on a Lombard — #4
The Lombard is up and running again and seems to be cooler even with the original 400mhz processor. The only issue I have with it is that FireFox 3 will not run-Opera was installe…
Found 11,116 posts across 1 forum.
iMac G3 opinion — #13
I was happy with Panther on a CRT iMac for quite a time after the appearance of Tiger, but the change to Tiger was prompted by its greater Web security. Tiger's 'stealth mode' and…
iMac G3 opinion — #12
I'd stick with Panther on a G3 for optimal performance. Tiger is more compatible but more memory and processor intensive. I'd only use it if you had a program that required it.
So, Beige G3's. — #37
haha thanks! It is a minitower. Also I should note that I have a firewire USB tango card in it as well as an Acard 6280M ATA 133 controller in it. Reason for such upgrades is my…
So, Beige G3's. — #36
My beige config is in the signature. Are there any ways to get the freaking dvd player to work on this thing?!?!?!?! I did a mod/hack where you delete the install check file in t…
So, Beige G3's. — #35
On the other hand, what is it with beige motherboards dying? I replaced the one in mine twice over the years. Both times the symptoms were a non-booting OS X install, OS 9 bootin…
So, Beige G3's. — #34
My beige config is in the signature. Are there any ways to get the freaking dvd player to work on this thing?!?!?!?! I did a mod/hack where you delete the install check file in t…
iMac G3 opinion — #11
If you really just want to own a G3 iMac, and particularly if it's one of the more collectable color variations, like "Flower Power" or "Blue Dalmation", sure, go ahead. Try not to…
iMac G3 opinion — #10
My recent switch from three 500MHz/1GB iMacs running Jaguar, Panther and Tiger to a single G4 DA (quickly upgraded from 466 to 533 to 733MHz) was to be able to drive a 20-in ADC di…
iMac G3 opinion — #9
Say what?
I distinctly recall MacAddict doing an article on various machine upgrades.
They upgraded on and painted it to look like a marshall amp.
Click to expand...
That was …
Fan control on a Lombard — #3
You can test the Lombard internal fan by itself. Disconnect it and make a drawing of the three wire colors and where they go into the plug housing. Then if necessary remove the c…
Fan control on a Lombard — #2
Perhaps you can find a 5V point somewhere and connect the internal fan directly to that. Maybe on the USB port. It won't be temperature controlled, but at least it'll run.
It wo…
iMac G3 opinion — #8
AvalancheSJ, it's still worth shopping around for a cheap G4 as you should be able to find one in your price bracket if you hunt. The FSB does make a fair bit of difference and th…
iMac G3 opinion — #7
Say what?
I distinctly recall MacAddict doing an article on various machine upgrades.
They upgraded on and painted it to look like a marshall amp.
Click to expand...
That was …
iMac G3 opinion — #6
Say what?
I distinctly recall MacAddict doing an article on various machine upgrades.
They upgraded on and painted it to look like a marshall amp.
iMac G3 opinion — #5
That iMac is a good performer, and yet I would try for a lower price on it if possible. If you're not taken by the idea of a tower and you just want a convenient little workstation…
iMac G3 opinion — #4
well i was looking on eBay and craigslist and both are kinda pricey for a g4 iMac, Mac Mini, and PowerMac, about $90 (£45ish) + shipping about $25 and up. and (with my PC knowledge…
iMac G3 opinion — #3
It's not really worth it, for around the same amount you should be able to get a low end G4 on ebay: £35 G4. Much more expandable and all you need is a cheapo monitor to go with i…
iMac G3 opinion — #2
For most "normal" modern computing tasks, (web browsing, music, email etc), the 500MHz era G3 iMacs are more than up to the job and will motor along nicely with Tiger and a decent …
Project Silvertooth — #21
Sun. Aug 31st 2008 3:19 AM - BOOOOOOOOST! [] ]'>
I got bored, so I decided to give my Power Mac G4 Quicksilver a little boost. Removed the CPU module and flipped it over.…
G4 (sawtooth) graphic cards — #23
ok I have my eye on Radeon 9800 pro I will give that a try
G4 (sawtooth) graphic cards — #22
^^The CPU and Ram upgrades are not the problem here, as a last resort you may need to beef up the PSU for a high end AGP card but if you stick an old Radon in, their power requirem…
G4 (sawtooth) graphic cards — #21
to coius
I also note that you are running a stock machine no upgrades
mine has sonnet/encore st/G4 1.8Ghz CPU and 1GB memory
and there in lies my problem, nothing seems to work …
G4 (sawtooth) graphic cards — #20
to Rodus and Coius: I have been told because my G4 AGP is no longer stock ie upgraded that no Geoforce cards will work because of power issues is this true ?
Click to expand...
…
G4 (sawtooth) graphic cards — #19
According to this. Yes [] ]'>