Skip to main content
Search titles, bodies, and author names
Found 840 posts across 1 forum.

g4 cube startup issues help! — #1

I had a bad hd and replaced it 2 weeks ago bad sectors. now it has stopped starting up 1 it chimes 2 i get a gray screen no pin wheel 3 nothing happens. i have tried bootin…
68kMLA Hardware by madmann Sun, 3 May 2009 - 14:26

Duo Dock won't boot. — #1

When i put the my duo 2300c into the original duo dock after it has been sitting for a few weeks it boots just fine and runs for about a minute then shuts down. Each time i start i…
68kMLA Hardware by Dave040 Sun, 12 Apr 2009 - 23:50

Pismo 400 Issue — #1

I was given a Pismo stock except the HD was smaller. After aquiring a fully loaded Wallstreet 14" with hinges not doing so well. I gutted it intended on making a good pismo out o…
68kMLA Hardware by Strimkind Sun, 12 Apr 2009 - 18:04

Tiger install on beige G3 with xpostfacto problems — #1

Ok, so if you read my buildup thread, you know that I have a 300 MHZ beige G3 minitower that I'm trying to install tiger on. It has 768 MB ram, rev. c ROM (recognizes second hard d…
68kMLA Hardware by Green78II Mon, 30 Mar 2009 - 19:14

WYSE term. emulation? — #1

Does any newton program have this? I'd really like to term into my work server, but the guys in the upper echelon many years ago decided to use the WYSE standard for terminal. I do…
68kMLA Hardware by wanderingjew Thu, 26 Mar 2009 - 05:18

Ok get this *scratches head*... — #1

I have a solo 867Mhz 2001 Quicksilver (2001 with an 867Mhz CPU) with the following specs below: 867Mhz 7450 PPC G4 1.5GB PC-133 RAM (all apple certified, known working in a sawto…
68kMLA Hardware by coius Wed, 25 Mar 2009 - 18:52

2400c Issues! — #1

For owners of 2400c's, I've been having an issue with my 2400c. I had GLOD but I figured out how to get out of it, which works for my 2400c. Now, whenever I shut down, and leave f…
68kMLA Hardware by Redjack Tue, 24 Mar 2009 - 17:32

Apple IIe memory chips — #1

I am posting in this forum to see if anyone here with an non working apple iie or parts would happen to have a few extra memory chips, aka 16 pin dip memory chips from one of their…
68kMLA Hardware by drbalint Tue, 24 Mar 2009 - 17:30

How to test power supply — #1

hello i've found some old apple II parts with 3 power supply inside cases and 2 others one "alone" should i test them with the ATX pc way, putting a cable between green and black…
68kMLA Hardware by motion Sat, 21 Mar 2009 - 12:48

Resurrecting My Wallstreet — #1

Hi guys. I have my pride and joy, 300mhz 14" wallstreet PDQ, and I figure it's time to resurrect it to see if I can. IIRC, it has a problem with the fan staying on, from the time I…
68kMLA Hardware by iamdigitalman Thu, 19 Mar 2009 - 05:14

Dying PB1400cs — #1

hi!, this is my first post and i really need your help, some days ago i bought from internet a pb1400 almost mind but it say "doesn't turn on" on the place, anyway.. just for $30 b…
68kMLA Hardware by dading Tue, 3 Mar 2009 - 19:58

eMac not turning on — #1

It turned on before but the hard drive was dead, swapped the hard drive, tried turning it on but it doesn't do anything. I hear the CRT have a slightly high pitch noise, so it's g…
68kMLA Hardware by Torbar Sun, 1 Mar 2009 - 19:39

How do soft-switches work? — #1

Here's a question for which I have not found the answer: The Apple II, as you should know, has some soft-switches, memory locations which cause some setting to change. My question…
68kMLA Hardware by Dog Cow Thu, 26 Feb 2009 - 22:40

What to do with spare Pismo LCDs — #1

I needed new clutch hinges for my Pismo so I won an auction on eBay that contained two sketchy LCDs and one set of hinges. So I have a couple of spare Pismo LCDs. One is supposed…
68kMLA Hardware by Dennis Nedry Thu, 26 Feb 2009 - 20:46

Tray Load question — #1

I need the service manual. Serching high and low only gives me the slot load. I have removed the CRT completely and now I don't remember what the non standard looking cables are an…
68kMLA Hardware by Christopher Tue, 24 Feb 2009 - 07:02

G4 Processor Upgrades — #1

I was on the MacSales site, looking at the G4 processor upgrades for an old AGP 400 Mhz Sawtooth, and I had some questions. It feels...expensive, but of course the computer would b…
68kMLA Hardware by Asher Tue, 17 Feb 2009 - 04:24

What PowerBook do I want? — #1

AAAAAAAAAAAAAAAAAAAAGGGGGGGGGGGHHHHHHHHH!!!!!!!!!! That crashing sound you hear is the sound of Windows breaking. No, I didn't throw my ThinkPad through one. Microsoft Windows ju…
68kMLA Hardware by BookWorm Mon, 16 Feb 2009 - 01:35

Need a decent PowerBook (603 or G3) — #1

I just need something that I can use at school, without worrying about it getting damaged or anything like that. I was thinking along the lines of a 3400C, or even a PowerBook G3. …
68kMLA Hardware by Gil Mon, 16 Feb 2009 - 00:09

Powerbook G4 VGA not powering up — #1

I had an instructor bring me a Powerbook G4 that won't power up. I tried resetting the PMU and taking the battery out, as well as re-seating the RAM. The charger light in the back…
68kMLA Hardware by wood_e Thu, 12 Feb 2009 - 16:16

NuBus CPU upgrade in Duo dock? — #1

Can I put a NuBus processor upgrade in my Dock II for use with my 2300c? Is that even possible?
68kMLA Hardware by sambapati87 Thu, 12 Feb 2009 - 16:13

ATA Redemption — #1

Internal ATA 0: CD-ROM + CD-RW problem is that both CD Drives do not work together. If CD-RW is set to MASTER, CD-ROM is SLAVE, only CD-RW is working. If both are CABLE SELECT onl…
68kMLA Hardware by slomacuser Sun, 8 Feb 2009 - 12:12

Apple IIc video cable type? — #1

I have an Apple IIc, and a power supply is on the way. Now all I need is a composite video cable in order to hook it up to my TV. Just wondering...does it have to be the type wit…
68kMLA Hardware by Apostrophe Sat, 31 Jan 2009 - 16:12

Yay my newton is still alive.... — #1

Had a horrible time trying to find out what was wrong with it only to discover after a lot of messing about it was my us/uk adapter had died for the charger so the battery was just…
68kMLA Hardware by zerohour Tue, 27 Jan 2009 - 08:23

Wallstreet II PRAM battery — #1

How do you charge this thing if the main battery is dead? Remove it and plug it into the wall?
68kMLA Hardware by quinterro Thu, 22 Jan 2009 - 18:29

Gig-e iffy about HDD booting — #1

Tonight I set up my gigabit ethernet G4 with my new monitor, and very soon decided to nuke the 10.2.8 install with panther, which is what I happened to have lying around. Anyway, a…
68kMLA Hardware by John8520 Sun, 18 Jan 2009 - 01:39
mp.ls