The adaptor has no switches. I am away from home now. So I can't really get anymore details.

What sort of adaptor are you using? If you have an adaptor with DIP switches or a dial, you might want to adjust it to force the monitor to run at either 640x480 or 800x600.

I am pretty sure the display can display 800x600. The display is made by a company that starts with N I can't remember right now. I'll check later today and try resetting the PRA…

There is a (blue) wire soldered between the aluminium 'can' (looks like an oscillator - located by the power plug on the board) and the small square chip next to it. The capacitor…

Perhaps its a very early production model, and there was a part shortage at the time this machine was built? Or perhaps it could be a *very* late prototype? Does the board differ t…

Hi all, just bought a(nother) SE/30 on ebay, so I can practise with my imminent capacitor replacement for my 'proper' SE/30 running A/UX. The monitor's a bit ghosty and there's no …

What other resolutions does the LCD support? The Performa x2xx/x3xx internal video does not support 1024x768 - only 640x480, 800x600 and 832x624. If the display only supports 1024x…

butbutbut...the red one is even called "redline", which means it HAS to be fast - if you go past the redline, you blow the engine

So I have a Classic II with 4 mb of RAM. I got it open (finally) removed the old memory and installed 2 4mb 30 pin SIMMs. I power up the Mac, go to "About This Macintosh" and it …

So I have a Classic II with 4 mb of RAM. I got it open (finally) removed the old memory and installed 2 4mb 30 pin SIMMs. I power up the Mac, go to "About This Macintosh" and it …

I doubt this applies but my powermac is a real pita about VGA too, if you start that machine up without a monitor plugged in it defaults to the tv out, which means you gotta hook i…

So my Performa 6214 won't output video to my VGA screen. I know this adapter is good and it worked intermittentley on another screen, the screen I am trying to use is a 15" 1024x76…

Dude, let me take an inventory on my vintage stuff. Since I am downsizing my 68k/early-PPC stuff, I may end up having more adapters than I really have use for. I'm getting to the…

I'm sorry to say the orange goes faster. It also looks better. //wthww

I have the 840avs now. Well... They are sitting in the kitchen. However, at this point they are useless since i have no adapter for the video, neither a monitor to use it with. I…

The Powertoggle works with a normal slot adapter and AV video card, but not with my Sonnet upgrade card and the same video card. It chimes fine with the Sonnet card, but I get no …

On a PowerBook 160 that I have been playing with this morning, I noticed, to my surprise, that if I turn off the 16 greys and set the Monitors Control Panel to display in B/W only,…

I have an 840av in nearly stock config, paired to an AudioVision display, which although "for" the x100 powermacs, works fabulously if you've got the correct adaptor. I tried 7.6.…

I want a red one, cuz red goes faster

Sounds like either the thread is all chewed up in the hole on the front panel, or else the screws are out, its just friction on the back panel stopping them falling out. To tell th…

So, I'm trying to get into my Classic II to install some RAM. I have a T-15 driver that will reach the silver screws under the handle. I can take a flashlight, shine it into the …

//wthww

Seems like a good trade to me. I've always liked the 840AV's and in particular the nice compact case style which has alwaysd struck as both cute and elegant at the same time. Th…

If I had two working examples (I do happily have one), I would pop in a 68-pin scsi and Nubus Jackhammer, and install MacOS 8.1 on one of the machines. A Nubus card like the Spigot…

Oh man, I meant to say AdoptAMac.com was the site. Not We Love macs. Forgive me, I dunno where I got that from. EDIT: I meant to also say that I was getting the 840avs from Chri…