Yay! He's back! Glad to hear from you, Trash! Peace, Drew Click to expand... Thanks for the welcome comrade! In just a few minutes my friend is helping me pick up 9' of 6" b…

Yay! He's back! Glad to hear from you, Trash! Peace, Drew

I'm back, but until I re-learn how to embed a URL or get around to copy/pasting my '''fritter return to the web announcement in the lounge, you folks are SOL on the full story. ht…

What I did when I had this problem is take the hard drive out, put it into a tiger capable mac, then install tiger on that first partition, before the user setup process, just tak…

I did the same install on a beige G3 some back and had a couple of problems. I had to format a partition not at but slightly under 8 gb and it had to be the first partition on the …

I wonder if I should partition the whole 80gb drive into 7.5gb partitions and see what that does. Click to expand... You'd just end up with a whole lot of 7.5GB patitions, whic…

Just tried it. Screwed around with the drive configuration and got the same results as before. I wonder if I should partition the whole 80gb drive into 7.5gb partitions and see wha…

Just tried it. Screwed around with the drive configuration and got the same results as before. I wonder if I should partition the whole 80gb drive into 7.5gb partitions and see wha…

try making is something like 7.5GB. that's probably the problem.

Ok, so if you read my buildup thread, you know that I have a 300 MHZ beige G3 minitower that I'm trying to install tiger on. It has 768 MB ram, rev. c ROM (recognizes second hard d…

Can you approach it from the server side? Can you add VT emulation config files to your home directory and profile?

I always use a hard disk -- one that is usable but disposable -- for 12V and 5V testing. It is easy to make a test cable (with tapping points to measure voltages) from salvaged wir…

Actually, macdan has a solution that does not involve finding the same hinges (all three displays use different hinges, but the same clutch). All you need to do is pop off the clut…

Actually, macdan has a solution that does not involve finding the same hinges (all three displays use different hinges, but the same clutch). All you need to do is pop off the clut…

Have you tried taking out all drives except for the optical, and then giving it a go? That way it would force it to boot off the disc, or not at all. Sometimes my b&w G3 wo…

ok thank you

thanks for this info, so i can just plug power supply "alone" and if i heard the noise, that means power supply works ?? i can do it with no risk to damage power supply ?? Click…

thanks for this info, so i can just plug power supply "alone" and if i heard the noise, that means power supply works ?? i can do it with no risk to damage power supply ?? i want …

Does any newton program have this? I'd really like to term into my work server, but the guys in the upper echelon many years ago decided to use the WYSE standard for terminal. I do…

Have you tried removing the SATA card and just using the IDE drive?

The Apple II power-supply is fairly "intelligent". If it detects a no-load situation (that is, nothing is taking the electricity), it will short-circuit itself indefinitely. This w…

Have you tried taking out all drives except for the optical, and then giving it a go? That way it would force it to boot off the disc, or not at all. Sometimes my b&w G3 w…

This thread gives details of the cells needed to replace your backup battery. They are common and cheap, I found that the soldering was not especially difficult, and the replacemen…

I have a solo 867Mhz 2001 Quicksilver (2001 with an 867Mhz CPU) with the following specs below: 867Mhz 7450 PPC G4 1.5GB PC-133 RAM (all apple certified, known working in a sawto…

For owners of 2400c's, I've been having an issue with my 2400c. I had GLOD but I figured out how to get out of it, which works for my 2400c. Now, whenever I shut down, and leave f…