Yes, after a little trial and error, I had mine at full speed for both OS 9 and OSX. If OWC doesn't solve the problem, I'll get my machine out of storage later this week and check…

If you enable dynamic power management, doesn't that mean the CPU drops to half-speed when possible, as in idling while you look at a CPU speed screen? CPUD and other speed sensing…

Okay I emailed OWC's tech support. In the meantime... Metronome indicates that my bus speed is indeed set to 100MHz. I double checked my jumpers and they are correct for that sett…

I have a PowerLogix 1.1 ghz processor that's in a B&W G3. It ignored the motherboard jumper settings as far as processor speed went. I never did try changing the bus speed …

One utility you may want to track down is called System Picker. I'm not sure off the top of my head who developed it or what its license was (freeware, shareware, proprietary, etc)…

To "unbless" a system folder you need to remove either the System file or the Finder. One easy way is to create a folder inside the system folder called "Finder Hide" or some such …

Hmm, for some reason I'm getting no quote button at the bottom of messages. Anyway, if you're getting 650 MHz when set to a 11:1 ration, then the bus speed of your B&W mus…

It is possible to hack/ add a localtalk port just next to the Newton Interconnect port (that little square piece of plastic comes right out when you disassemble the thing), for dir…

You can try contacting support at Powerlogix or OWC.

Well, I was searching ebay and actually found another 6100 DOS compatible. The opening bid was 99 cents so I bid it and won. The shipping was a bit high but not more than I would h…

No dice. I moved the number one jumper to the number four position as shown here to no effect. Apple System Profiler and Metronome still report 650 MHz. TattleTech, interestingly, …

I recently got a Newton 2100 and love it. The screen size, battery life, backlight, and handwriting recognition are all amazing. The only problem is that I seem to be facing a boot…

The Jumpers are most likely the problem. Switch 'em to a higher config (450) and see what happens.

The machine: B&W G3 (Rev B) The upgrade: PowerLogix G3 1.1GHz The software: Mac OS 9.2.2 CPU Director 1.5f6 (application) CPU Director INIT 2.0b1 (extension) The …

Note that there are three different PDS right angle adapters for the 6100: 601 PDS -> PDS passthrough for AV and HPV video cards. The Sonnet G3 upgrade also presents a 60…

Now all I need is the actual card and angle adapter for my 6100 Click to expand... I might have a spare 6100 PDS adapter in the garage somewhere. The card can befound easily en…

I wouldn't mind images of the disks (except the DOS 6.22 and laserwriter ones) if you don't mind. Would be nice to have for my 6100 DOS machine. I think I have the manuals, just n…

Two say Macintosh display drivers 1&2, one just says 'Mouse' which I am going to guess is either a MS mouse driver or allows DOS to recognize the ADB mouse, one that says S…

What floppies are included in that set? Can you make images?

That did the trick! Thanks a lot!

http://www.macdrivermuseum.net/video/radius/ Try that. Looks like they mistakingly put .com instead of .net in those links, which leads to a fake search page.

I did - unfortunately, the links on that page appear empty. When I click on them I'm redirected to a generic search page.

Scooped up this one today. Has all floppies and documentation that go with the 6100 DOS card. Now all I need is the actual card and angle adapter for my 6100 DOS compatible. :-/

Try this website: http://www.macdrivermuseum.net/radiuscards.html

Hello collectors: I have recently acquired an SE with a Radius Accelerator 16 installed. However, it is the two-floppy model with no data, and I understand that to access the ful…