Hi folks.... I just upgraded the OS in my Color Classic (with a Color Classic II logic board) to 7.5.5 After that, I installed a ethernet card and software.  The software has a o…

Yeah good plan - I'll try a different card before bothering Mike thanks again folks

Have you tried a different SD card? You could quite simply be running up against a bad card or a cheap card that isn't rated for the task and blocks keep going bad.

nope i have no idea it sounds strange.   maybe talk to mike and see what he thinks. doesn't he offer support for his products these days?

Frustratingly that doesn't seem to have solved it (now have 2x ~500MB partitions and 2x ~1.4GB partitions). Not sure what to try next... maybe a reinstall of the system software?

Unfortunately it's ultrasonically welded so I can't open it without destroying the case. My assumption is you will find the AAUI-AUI conversion is completely passsive, along with a…

yeah i always had good luck with 1.7 gig partitions.  seemed to get issues when i went over that.   

olePigeon said: How about Lido? Click to expand... I will start looking olePigeon... Thanks for the tip. jack

Thanks very much - I used Lido to format it in the first place, but my partitions are 2gb, I'll backup, initialise and then make smaller partitions and try again.

NJRoadfan said: Funny because I have an official Apple AAUI to 10BaseT transceiver with actual electronics in it that is a fraction of the size. IBM used the AAUI plug too, b…

How about Lido?

Hi Folks.... Can anyone tell me the CFM and the dBA of the *original* Color Classic fan? The original fan is 80 mm X 80 mm by 25 mm.  I believe the fan housing can take at least …

Yeah, make sure your partitions are under 2GBs.  That can cause all sorts of weird problems.

Rats!  The patched HDSC Setup bootdisk is too large to fit on a 3.5 inch floppy.  I will keep looking. Thanks everyone jack

i would say hit it with lido7 ,  nuke drive make new partitions, don't exceed 1.7 gb each. re-install 7.5, and you should be fine. here

The next thing I'm going to try is a fresh system install on a different SD card

I should mention also that I've swapped out the PSU and logicboard and it behaves the same (at first I thought it was maybe faulty SCSI controller).

Sherlock isn't in 7.5.5...it's not even 68k compatible.

Funny because I have an official Apple AAUI to 10BaseT transceiver with actual electronics in it that is a fraction of the size. IBM used the AAUI plug too, but called it "Mini AUI…

Are you using Sherlock to speed up file searches? The older version of Sherlock corrupts the file structure, best to find the extension and remove it.

The patched HDSC should work. Since it is System 7.5, you need to partition the CF into 2 or more partitions of 2GB or less.

Forgot to mention, I also updated to the latest SCSI2SD firmware (I was on 3.6) and it's the same.

I'm having a strange behaviour (just started recently) with freezes on my Quadra 700. The first time it just happened whilst I was using it, and the segment of the hard disk that …

Those tiny storage bins look like normal large storage bins.  The perspective makes it look like that AAUI adapter is the size of a briefcase.

Holla holla, $2. { "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbox_error": "The requested content cannot be load…