actually, i find it quite the opposite, save for the G4. The tray-load are easy, just take off the bottom, and then pull out the tray. The CD is just fixed to it, and easy to get.…

actually, i find it quite the opposite, save for the G4. The tray-load are easy, just take off the bottom, and then pull out the tray. The CD is just fixed to it, and easy to get…

The iMac G3 tray load and iMac G4's I must say are the two harder ones to get drives out of. The slot load on the other hand is much simpler.

Hi, Try this page. It's a great resource that provides instructions on getting to any component in a slot-loading iMac. http://www.scribd.com/doc/103447/iMac-G3-Disassembly-Guid…

How do I get the to the HD on a slot-loading imac

It is a slot-loading model

It is a slot-loading model

We need a bit more info...is it a tray loading model like this: { "lightbox_close": "Close", "lightbox_next": "Next", "lightbox_previous": "Previous", "lightbo…

I need to put a new drive in my imac G4. How do I get it open?

I believe the other one is Delphi. Click to expand... yeah that sounds about right.

There were also two different types of cooling units, one by Panasonic and one by...somebody else, i forget who, the one by Panasonic actually works brilliantly and has a much lowe…

Not even all the G4's could boot into OS9 directly, you just had classic support under OSX. Click to expand... I think the last gen MDD were the non OS 9. Click to expand...…

Thanks, Luddite already hit me up. For all other confused folks, just borrow/steal a windoze machine and run the SHK over in Ciderpress, it's not too bad. Read the manual to find o…

For others: ProTERM can be downloaded from here: http://lostclassics.apple2.info/downloads/?dl_cat=10 For arfink: Tony Diaz promised to post disk images of ProTERM: http://groups.…

OK, so ProTerm is now released and I'm trying to get it from my PC to my apple II. ADTPro isn't doing it, because it's a SrinkIt file, and I have no way of handling .shk's on my Li…

After getting this up and running, I am now on a roll. I just got a troublesome quicksilver up and running. It was originally not booting, or booting to openfirmware prompt and fr…

This Blog also seems to be providing a running commentary on progress being made on solving the 2010 problem. In fact, it's a great Newton site in general and well worth a visit if…

Thanks for the reply, beachycove. I'm glad the problem is being tackled by people who know what they're doing. I, too, will wait until the last possible moment to install the patch…

Looking at the name plate was my first place to look however it was just a 1400c label. That website worked for me and I found that the machine I have is a 1400c 133mhz while the …

Umm, doesn't the machine's badge tell you that? It should say one of the following: 1400cs/117 1400c/117 1400cs/133 1400c/133 1400cs/166 1400c/166 The 2nd number (after the…

IIRC the 166Mhz CPU only worked in 1400/166 models, so if that works in there you'd assume it was originally specced to this. JB

I got a G3 upgraded Powerbook 1400c a few days ago and it came with 2 133mhz and 1 166mhz in addition to the G3 chip inside. Is there any way to tell what the original CPU was? T…

Well not all G5s are liquid cooled, basically if its clock speed is 1.6, 1.8 or 2.0, regardless of processor count, its air-cooled and thus has no chance of spontaneous combustion.…

I have a few old and reliable G3 and my G4 powerbook to help me with my Classic *fix* but honestly I've played around with Apple's new gear at their Store and it's so zippy compare…

Well, that confirms what I had suspected. :-/