The problem with PPC and Youtube is that once you can view video at 1080p resolution (using any old crappy pc)  its hard to go 480p again. Plus I don't think Netflix works on PPC a…

OK, so here I am. I've been using my Dual 1.25 GHz MDD as my main desktop for about three weeks. It's not too bad, actually. Just slow. Even YouTube plays decently (on low, of co…

Thank you

There are 3 install discs that were issued by apple to DTK owners: Mac OS X 10.4.1 8B1025 Mac OS X 10.4.1 8B1099 Mac OS X 10.4.3 8F1111 All of these have been patched in variou…

The BIOS is a custom one based on the intel reference bios for this board series. It pre-dates the "retail" board used in the D915GXX series by a little bit (no surprise there as t…

Cool!

I try this this week Today, i have connected a VGA header (with haplain help) and it works : i have connected two display 

raoulduke.... What I love about building your own battery replacements is that the older the device, the higher mAh your new one will be. I just found a PRAM replacement battery …

smiba said: I've put the project on hold for a while until I have some more time for it. So sorry, Can't help you further. The iMac G3 should have an intergrated ethernet po…

All three PowerBooks (PB 3400c + PB G3 "Kanga" + PB 3400c) are booting to desktop, the left one still with faulty keyboard connectors.

Here some more pictures which I shot, when the PB 3400c battery fell down. - Yes the battery is still ok.  (dimensions in centimeters)

Schmoburger said: This page is as good on my souped-up G3-powered 9600 as it is on my G5 so I doubt you will have any dramas on the iMac TC is a bit boggy in Classilla but…

smiba said: Would you have any copy of the OpenTransport disk by any chance? Click to expand... I do have a copy, but I only have my CC, and I can not figure out how to s…

System7today has it I think. 

Would you have any copy of the OpenTransport disk by any chance?

After installing the software for my ethernet card (Farallon), I could not get my internet to work until I installed Open Transport.  Then it was a cake walk.  I was using OS7, an…

I've put the project on hold for a while until I have some more time for it. So sorry, Can't help you further. The iMac G3 should have an intergrated ethernet port though, any rea…

Hi, Did you get this working? I have a Dayna pocket SCSI/Ethernet box Im trying to use to connect a Classic to an old iMac G3 - the candy coloured ones.

Good luck! I doubt to be successfull with mine, as the leaking PRAM battery was above the keyboard connectors and video part. The worst place ever!

Congrat ! Will try that Scratch Brush on one of my 3400/240 boards . Only tried with a tooth brush, and it couldn't reach every places.

MikeatOSX said: BTW: Here's a new version of the Kanga logic board pic with some labeling. http://www.mediafire.com/download/cb2726zofowbqkg/PowerBook_G3_Kanga_Logic_Board_H…

gdanie said: I've done this several times.  My 700mhz g3 iMac is a fully featured machine, as far as I'm concerned. Especially since its maxed out in RAM.  OS9 has all you ne…

I could definitely do what I need to do on the net with my Powermac 6100 -- itd be sorta pokey, but y'know //wthww

I've done this several times.  My 700mhz g3 iMac is a fully featured machine, as far as I'm concerned. Especially since its maxed out in RAM.  OS9 has all you need, especially on t…

Any update on the BIOS dump? Have you had any success? It'd be interesting to compare it with the "plain" Intel version and see where the main differences are.