Daystar NuBus RAM Expansion Board? — #7
Somebody from the old IRC channel has the 840AV version of a RAM card that used 8 x 72 pin SIMMs (32MB max each for 256MB total). I think Newer technology sold it. It was pretty fa…
Found 13,442 posts across 1 forum.
Daystar NuBus RAM Expansion Board? — #6
I have seen only one of these, on eBay a few years back. It sold for something outrageous even then, before the prices of nubus-era equipment began to go up.
As I recall, the writ…
PM 8600 and 9600: No CPU upgrades working — #8
I tried installing a 400mhz processor I pulled from a B&W G3 and it didn't work at all. (I assume the bus speeds are wildly different)
Click to expand...
B&W bu…
Daystar NuBus RAM Expansion Board? — #5
Daystar RAM PowerCard. I'm pretty sure it was not addressable as system memory, just as RAM disk, print spool, and disk cache.
FWIW I have been searching for this and any similar …
Daystar NuBus RAM Expansion Board? — #4
This tech note:http://developer.apple.com/legacy/mac/library/technotes/hw/hw_520.html
states that:
"There is no way that the Macintosh operating system can recognize NuBus RAM an…
Emulate intel support on G4? — #15
The only way I can even think of would be to run a PC hardware emulator like QEMU or Virtual PC, then run "Hackintosh" OS X inside that. It would be dog-slow, though. (Hrm... Yo…
Emulate intel support on G4? — #14
We are only allowed to place rack units in the data center I've tried micro-atx boxen clipped to the side of the racks behind panels and got whacked for that pretty hard. Still…
Installing OS 9 on Clamshell iBook — #7
Thanks everyone for your help, I finally decided to allow the OS 9 disc to format the hard drive and installed it
Firmware now updated, and Tiger installation restored perfectly w…
Emulate intel support on G4? — #13
Gorgonops much thanks there. I think I'm going with the xserve and licenses after all. Get this - the simple reason is: .......
We are only allowed to place rack units in the d…
PM 8600 and 9600: No CPU upgrades working — #7
Turns out that I have a 333mhz processor, not a 400mhz processor installed.
I tried installing a 400mhz processor I pulled from a B&W G3 and it didn't work at all. (I …
Daystar NuBus RAM Expansion Board? — #3
Triangle Computing used to have one as well. Missed that one on Ebay years ago too, but I do have their Scsi accelerator card. It had drivers for up to OS 6.0.8 too! That card s…
PM 8600 and 9600: No CPU upgrades working — #6
CPU Director for OS 9 does a better job than XLR8s, and no serial required!
You also need to couple the multiplier with a bus speed the 8600/9600 likes; most don't like to be push…
SUCCESS! Mac M0001 on the internet! — #27
Do we know if he's been saving them, or just having them ephemeral as they run through?
Click to expand...
He's been saving them. He uses them to build a database that can dist…
PM 8600 and 9600: No CPU upgrades working — #5
Okay, so I got the XLR8 to work (and it took a bit of digging as of course, there is a Ben 10 character with the same name...) and now I'm running a G3 at a blazingly fast 400mhz (…
Daystar NuBus RAM Expansion Board? — #2
As far as I know they were all just used for RAM disks.
Didn't the original Daystar cards have some kind of bridge for connecting to other Daystar cards without using the Nubus?
Daystar NuBus RAM Expansion Board? — #1
This tech note:
http://developer.apple.com/legacy/mac/library/technotes/hw/hw_520.html
states that:
"There is no way that the Macintosh operating system can recognize NuBus RAM …
PM 8600 and 9600: No CPU upgrades working — #4
Sonnet upgrade cards usually require no configuration, so apart from cleaning the contacts with an eraser I'd suggest it's faulty.
The XLR8 will need to have the correct CPU multi…
PM 8600 and 9600: No CPU upgrades working — #3
No, I have not downloaded the manual as I didn't know if XLR8 still existed (oh dear, the dreaded google search fault).
All I have to test with that I know work are the two 300mhz…
PM 8600 and 9600: No CPU upgrades working — #2
Have you downloaded the user's manual from xlr8.com and checked to make sure that the jumper/switch settings are reasonable? That is, that they are not set to speeds so fast one w…
SUCCESS! Mac M0001 on the internet! — #26
I am the owner of the oldest known to the vintage computer collecting community, operational, production Macintosh.
Click to expand...
Please don't go out of your way to explai…
SUCCESS! Mac M0001 on the internet! — #25
Do we know if he's been saving them, or just having them ephemeral as they run through?
Alright, here's my fully qualified claim:
I am the owner of the oldest known to the vintag…
PM 8600 and 9600: No CPU upgrades working — #1
I picked up an XLR8 MACh Speed G3 (supposedly a 400mhz 1mb cache upgrade but it could be anything as the ZIF processor could of been swapped) processor upgrade and a Sonnet Crescen…
SUCCESS! Mac M0001 on the internet! — #24
Known to anyone confirmed by any source. I don't personally know of any earlier Macs. I'll have to go through the eBay database I am building, but yes. The earliest in the M0001 da…
SUCCESS! Mac M0001 on the internet! — #23
Known to whom? He's got the earliest Mac listed in that database, that's all we know.
SUCCESS! Mac M0001 on the internet! — #22
Actually, if I recall those Macs were taken directly off the production assembly line and not given to the team until the Mac shipped, which was not until late January. Until confi…