Yeah good plan - I'll try a different card before bothering Mike thanks again folks

Kensington made the Turbo Mouse from 1986 for the original Macs and for the Apple II (presumably with mouse card). Features include two buttons for left and right handed use, and a…

Have you tried a different SD card? You could quite simply be running up against a bad card or a cheap card that isn't rated for the task and blocks keep going bad.

Once, I needed a drive cover for an SE. I didn't have an extra, but I did have a scrapper platinum IIe. I used a coping saw, files, and sandpaper to cut a makeshift one from part o…

Cut the @$$ end off a micro-floppy and hot glue it into the slot so it looks like it's been ejected. If someone has a clear/translucent micro-floppy to sell you, add LED edge lit H…

nope i have no idea it sounds strange.   maybe talk to mike and see what he thinks. doesn't he offer support for his products these days?

Frustratingly that doesn't seem to have solved it (now have 2x ~500MB partitions and 2x ~1.4GB partitions). Not sure what to try next... maybe a reinstall of the system software?

It would not print the right colour, it would be pure white.  But if I were to buy a drive cover off of eBay, for example, it would be a different colour anyway, since my case is s…

3-D printing with ABS filament is very cool, but does it come in the right color? Is resolution high enough to re-create the subtly texturing of the SE's Case? If I can find my mu…

Unfortunately it's ultrasonically welded so I can't open it without destroying the case. My assumption is you will find the AAUI-AUI conversion is completely passsive, along with a…

yeah i always had good luck with 1.7 gig partitions.  seemed to get issues when i went over that.   

olePigeon said: How about Lido? Click to expand... I will start looking olePigeon... Thanks for the tip. jack

They have 3D printers at the school I work at. It's pretty cheap to print. For example, I printed a case for my iPhone, it cost $0.55. I'm not sure if there is a 3D scanner there,…

Thanks very much - I used Lido to format it in the first place, but my partitions are 2gb, I'll backup, initialise and then make smaller partitions and try again.

NJRoadfan said: Funny because I have an official Apple AAUI to 10BaseT transceiver with actual electronics in it that is a fraction of the size. IBM used the AAUI plug too, b…

How about Lido?

I don't know if they ever made one specifically, but there were adapters out there.  I think our own member bbraun has/makes an adapter to connect ADB to pre-ADB Macs.

Hi Folks.... Can anyone tell me the CFM and the dBA of the *original* Color Classic fan? The original fan is 80 mm X 80 mm by 25 mm.  I believe the fan housing can take at least …

Yeah, make sure your partitions are under 2GBs.  That can cause all sorts of weird problems.

Rats!  The patched HDSC Setup bootdisk is too large to fit on a 3.5 inch floppy.  I will keep looking. Thanks everyone jack

i would say hit it with lido7 ,  nuke drive make new partitions, don't exceed 1.7 gb each. re-install 7.5, and you should be fine. here

The next thing I'm going to try is a fresh system install on a different SD card

I should mention also that I've swapped out the PSU and logicboard and it behaves the same (at first I thought it was maybe faulty SCSI controller).

Sherlock isn't in 7.5.5...it's not even 68k compatible.

Funny because I have an official Apple AAUI to 10BaseT transceiver with actual electronics in it that is a fraction of the size. IBM used the AAUI plug too, but called it "Mini AUI…